PETROLEUM PROCESSING AND PETROCHEMICALS ›› 2024, Vol. 55 ›› Issue (4): 28-33.

Previous Articles     Next Articles

PREPARATION OF Fe2O3 AS DENITRATION CATALYST BY RESOURCE UTILIZATION OF ROLLING SLUDGE

  


  • Received:2023-06-30 Revised:2023-12-20 Online:2024-04-12 Published:2024-03-26

Abstract: Fe2O3,as a denitrification catalyst,was prepared by separatingsolid phase from solid waste rolling sludge by calcination, the physicochemical properties of the catalyst were characterized by X-ray diffraction, NH3 programmed temperature desorption and H2 programmed temperature reduction,and its ammonia-selecitve catalytic reduction performance of nitrogen oxides (NOx) was investigated. The results showed that the catalyst (H-450) prepared under 450℃ air calcinationhad the best denitrification activity at the temperature range 300-400℃, and the NOx conversion rate was over85%. H-450 mainly exhibited γ-Fe2O3 active crystal form, and had abundant low-temperature reducible iron species and B acid, so it had high activity. The results of anti-SO2 and anti-H2O toxicity tests showed that the toxic effects of both 10% (φ) H2O and 100 μL/L SO2 were more serious than those of 10% (φ) H2O or 100 μL/L SO2 alone.

Key words: rolling oil sludge, reduction of nitrogen oxide, Fe2O3, crystal form, catalyst