环保型冷轧硅钢乳化液的研制及其摩擦学性能研究

石油炼制与化工 ›› 2015, Vol. 46 ›› Issue (4): 83-87.

环保型冷轧硅钢乳化液的研制及其摩擦学性能研究

李岩,孙建林,陈婧玥

北京科技大学材料科学与工程学院

收稿日期:2014-09-22 修回日期:2014-12-02 出版日期:2015-04-12 发布日期:2015-03-20
通讯作者: 孙建林 E-mail:sjl@ustb.edu.cn

DEVELOPMENT OF ENVIRONMENTALLY FRIENDLY EMULSION FOR COLD-ROLLED SILICON STEEL AND ITS TRIBOLOGICAL PROPERTIES

Li Yan,Sun Jianlin,Chen Jingyue

Received:2014-09-22 Revised:2014-12-02 Online:2015-04-12 Published:2015-03-20
Contact: Sun Jianlin E-mail:sjl@ustb.edu.cn

摘要/Abstract

摘要： 采用环保型基础油和添加剂研制一种环保型高润滑性能冷轧硅钢乳化液，对其摩擦学性能和润滑性能进行考察，并与KD型商用乳化液的性能进行对比。结果表明，与KD型商用乳化液相比，环保型乳化液的摩擦学性能明显提高，环保型乳化液润滑下的冷轧硅钢板的最小可轧厚度降低了13.3%，轧后板形及硅钢表面质量也更为理想，同时，环保型乳化液还具有良好的退火清净性。综合分析可知，环保型乳化液更适合在高速冷轧硅钢生产中使用。

Abstract: Enviromentally-friendly silicon steel rolling emulsion with high lubricating property was developed using enviromentally friendly base oil and additives. The lubricating performance was analyzed by MRS-10A four-ball tester and 4-high cold-rolling mil and compared with the KD traditional emulsion. The results show that relative to the traditional KD emulsion, the developed cold-rolling emulsion shows a higher lubricating performance, a better annealing cleanliness, and that the minimum rolling thickness is decreased by 13.3%. After rolling, silicon steel strip shape and surface quality is more ideal. It is concluded that the developed enviromental emulsion can meet the need of the high speed silicon steel cold- rolling process .

李岩孙建林陈婧玥. 环保型冷轧硅钢乳化液的研制及其摩擦学性能研究[J]. 石油炼制与化工, 2015, 46(4): 83-87.

Li Yan Sun Jianlin Chen Jingyue. DEVELOPMENT OF ENVIRONMENTALLY FRIENDLY EMULSION FOR COLD-ROLLED SILICON STEEL AND ITS TRIBOLOGICAL PROPERTIES[J]. Petroleum Processing and Petrochemicals, 2015, 46(4): 83-87.

参考文献

[1] 刘光穆，刘继申，谌晓文，等. 电工钢的生产开发现状和发展趋势[J]. 特殊钢，2005，26(1):141-144.
[2] 孙建林.轧制工艺润滑原理技术与应用[M].第2版.北京:冶金工业出版社,2010:139-151.
[3] 王士庭，孙建林，赵永涛，等. 板带钢冷轧乳化液稳定性与润滑性研究[J]. 石油炼制与化工，2010，41(4):58-62.
[4] Ahmed R, Sutcliffe M.P.F. Identification of surface features on cold-rolled stainless steel strip[J].Wear, 2000,244:60-70.
[5] Akira Azushima. O/W emulsion in cold sheet rolling[C].The Fifth Baosteel Biennial Academic Conference.2013, C: 49-55.
[6] Sun Y B, Hu L T, Xue Q J. Development and research progress of environmentally friendly lubricating oil additives [J]. Tribology,2008,28(4):381-385.
[7] 崔二宝，孙蓟泉，刘玉金. 乳化液在冷轧过程中的应用分析[J].中国科技信息，2008,21:142-143.
[8] 秦鹤年，罗宇. 冷轧钢板轧制乳化液的研制[J].润滑与密封,2009,34(8):79-83.
[9] 易美荣,孙建林,张旭等.环保型润滑添加剂对冷轧板带钢轧制液润滑性能的影响[J]. 石油学报,2012,28(5):858-864.
[10] Huart S, Dubar M, Deltombe R. Asperity deformation lubricant trapping and iron ?nes formation mechanism in cold rolling processes [J]. Wear, 2004, 257:471-480.
[11] Zhang W H, Wang D, Zhao Y F. Plate rolling oil composition and performance requirements[J]. Lubrication Engineering 2005,3:185-186.
[12] Louaisil K, Dubar M, Deltombe R. Analysis of interface temperature, forward slip and lubricant in?uence on friction and wear in cold rolling. Wear, 2009, 266:119-128.
[13] A.K. Tieu, P.B. Kosasih, A. Godbole. A thermal analysis of strip-rolling in mixed-film lubrication with O/W emulsions [J].Tribology International, 2006, 39:1591-1600.