石油炼制与化工 ›› 2015, Vol. 46 ›› Issue (10): 39-43.

• 催化剂 • 上一篇    下一篇

含介孔硅铝材料催化裂化催化剂(CRM-200)的工业应用

郑金玉1,罗一斌1,喻辉2,刘坤3   

  1. 1. 中国石化石油化工科学研究院
      2.中国石化催化剂分公司华北销售中心
      3. 青岛安邦炼化有限公司
  • 收稿日期:2015-04-15 修回日期:2015-05-07 出版日期:2015-10-12 发布日期:2015-10-08
  • 通讯作者: 郑金玉 E-mail:13910147996@139.com

INDUSTRIAL APPLICATION OF RFCC CATALYST (CRM - 200) CONTAINING MESOPOROUS SILICA-ALUMINA

  • Received:2015-04-15 Revised:2015-05-07 Online:2015-10-12 Published:2015-10-08
  • Contact: Jin-yu ZHENG E-mail:13910147996@139.com

摘要: 通过添加一种水热稳定性高、大分子裂化能力强、焦炭选择性好、成本低、易于工业化的无序介孔硅铝材料(JSA),开发出一种新型的催化裂化催化剂CRM-200,并在青岛安邦炼化的重油催化裂化装置上进行工业应用。结果表明,CRM-200催化剂具有优异的裂化活性,液体收率增加1.86百分点,油浆及焦炭产率分别降低0.92和1.59百分点,产品分布更加优化,产品性质得到改善;装置的处理能力明显提高,回炼量增加,掺渣比由69.92%提高到83.34%,操作条件更加优化,催化剂单耗大幅降低近1 kg/t。

Abstract: A new RFCC catalyst CRM-200 with disordered mesoporous silica-alumina material (JSA), which possesses properties of high hydrothermal stability, macromolecular cracking ability, good coke selectivity, low cost and easy to industrialization, was used in a RFCC unit of Qingdao Anbang Company. The industrial application results reveal that CRM-200 shows much higher cracking activity, the total liquid yield increases about 1.86%, the yield of slurry and coke decreases 0.92 percentage point and 1.59 percentage points, respectively. The distribution and properties of cracking products are improved. The processing capacity and recycle oil increases. The resid-ratio increases from 69.92% to 83.34%. The operation condition is optimized, at the same time the catalyst consumption reduces about 1 kg/t.