石油炼制与化工 ›› 2020, Vol. 51 ›› Issue (11): 90-93.

• 油品与添加剂 • 上一篇    下一篇

聚醚型合成压缩机油的研制

周康1,2,张遂心1,于海1,2,范丰奇1,2,伏喜胜2   

  1. 1.中国石油兰州润滑油研究开发中心
    2.中国石油天然气集团公司润滑油重点实验室
  • 收稿日期:2020-04-03 修回日期:2020-07-01 出版日期:2020-11-12 发布日期:2020-11-24
  • 通讯作者: 周康 E-mail:zhoukang_rhy@petrochina.com.cn
  • 基金资助:
     

RESEARCH ON SYNTHETIC COMPRESSOR OILS BASED ON POLYETHER

    

  1.  
  • Received:2020-04-03 Revised:2020-07-01 Online:2020-11-12 Published:2020-11-24
  • Contact: Zhou Kang E-mail:zhoukang_rhy@petrochina.com.cn
  • Supported by:
     

摘要: 使用聚醚基础油,通过对抗氧剂、极压抗磨剂、助溶剂和防锈剂等添加剂的筛选及性能考察,研制了一种聚醚型合成压缩机油。该产品黏度指数达到210以上,旋转氧弹时间超过1 000 min ,铜片腐蚀(100 ℃,3h)为1b级,四球试验的钢球磨斑直径为0.5 mm左右,具有优异的黏温性能、氧化安定性、防锈抗腐性和良好的极压抗磨性,达到国外同类油品质量水平。经过一年的实际使用,油品磨损金属质量分数低于30 μg/g,表明研制产品能够满足烃类气体压缩机的润滑要求。

关键词: 聚醚, 压缩机油, 烃类气体

Abstract: Using polyether base oil, a kind of polyether type synthetic compressor oil was developed by screening and investigating the properties of additives such as antioxidation agent, extreme pressure antiwear agent, co-solvent and anti-rust agent. The viscosity index of the product was more than 210, the rotary oxygen bomb time was more than 1000 minutes, the copper strip corrosion(100 ℃,3 h) was grade 1b, and the scar diameter after the four ball milling test was about 0.5mm. The developed product has an excellent performance in viscosity-temperature,oxidation stability,rust resistance and anti-corrosion and good extreme pressure anti-wear. The quality of the product reached the level of foreign similar oils. After practical use for one year,the wear metal content was less than 30 μg/g, showing that the developed product can meet the lubrication requirements of hydrocarbon gas compressors.

Key words: polyether, compressor lubricant, hydrocarbon gas

中图分类号: