石油炼制与化工 ›› 2021, Vol. 52 ›› Issue (6): 6-10.

• 催化剂 • 上一篇    下一篇

高孔体积、大孔径渣油加氢催化材料的开发

刘滨,杨清河,胡大为,曾双亲   

  1. 中国石化石油化工科学研究院
  • 收稿日期:2020-10-15 修回日期:2021-03-01 出版日期:2021-06-12 发布日期:2021-06-01
  • 通讯作者: 杨清河 E-mail:yangqh.ripp@sinopec.com

PREPARATION OF CATALYTIC MATERIAL WITH HIGH PORE VOLUME AND LARGE PORE SIZE FOR RESIDUE HYDROTREATING

  1. SINOPEC Research Institute of Petroleum Processing 
  • Received:2020-10-15 Revised:2021-03-01 Online:2021-06-12 Published:2021-06-01
  • Contact: Yang Qinghe E-mail:yangqh.ripp@sinopec.com

摘要: 以硫酸铝溶液和碳酸氢铵溶液为原料,采用化学共沉淀的方法合成氧化铝的前躯物碱式碳酸铝铵(化学式为NH4[AlO(OH)]2HCO3.2H2O)。结合反应机理,研究了反应体系pH和反应温度对碱式碳酸铝铵制备的影响。所制备的碱式碳酸铝铵焙烧后生成的氧化铝粉体具有高孔体积和大孔径的特点,适合用作渣油加氢催化剂的载体材料,并可与其他拟薄水铝石复合形成满足不同要求的具有不同孔结构的载体。催化剂活性评价和工业应用结果表明,采用碱式碳酸铝铵制备的氧化铝为载体材料的渣油加氢脱金属催化剂具有良好的脱金属和降残炭性能。

关键词: 碱式碳酸铝铵, 孔体积, 孔径, 氧化铝

Abstract: The precursor of alumina, ammonium aluminum carbonate hydroxide (AACH) with the chemical composition corresponding to NH4[AlO(OH)]2HCO3.2H2O, was prepared from aluminium sulfate solution and ammonium bicarbonate solution through chemical coprecipitation method. The effect of pH and temperature on the preparation of AACH was studied on the basis of the precipitating mechanism. The prepared alumina from calcination of AACH showed high pore volume and large pore size,was suitable to be used as the support material of residue hydrotreating catalyst, and could also be compounded with other pseudo-boehmites to form supports with different pore structures to meet different requirements. The results of activity evaluation and commercial application showed that the residue hydrodemetallization catalyst based on the AACH had good performance of demetallization and reduction of carbon residue.

Key words: Ammonium aluminum carbonate hydroxy hydrate, pore volume, pore size, alumina