石油炼制与化工 ›› 2025, Vol. 56 ›› Issue (6): 65-70.

• 催化剂 • 上一篇    下一篇

全硫化型催化重整预加氢催化剂FH-40A的工业应用

李泽   

  1. 中国石化青岛炼油化工有限责任公司
  • 收稿日期:2024-10-29 修回日期:2025-01-14 出版日期:2025-06-12 发布日期:2025-05-30
  • 通讯作者: 李泽 E-mail:lz.qdlh@sinopec.com

COMMERCIAL APPLICATION OF PRESULFURIZED PRE-HYDROTREATING CATALYST FH-40A FOR CATALYTIC REFORMING UNIT

  • Received:2024-10-29 Revised:2025-01-14 Online:2025-06-12 Published:2025-05-30

摘要: 国内某炼油厂连续催化重整预加氢装置在2023年大检修期间更换使用全硫化型催化剂FH-40A,对该全硫化型预加氢催化剂的装填及使用效果进行全面分析。工业应用结果表明,全硫化型预加氢催化剂FH40A具有简化开工步骤、缩短开工时间、减少环境污染等优点。与氧化型预加氢催化剂相比可节约40 h开工时间,在开工过程中检测所得循环氢中硫化氢浓度始终处于较理想水平,在装置开工运转6个月后,该催化剂表现出稳定且优异的催化性能。

关键词: 催化重整, 预加氢, 催化剂, 全硫化型

Abstract: During the maintenance period in 2023, a domestic pre-hydrotreating unit utilized the presulfurized catalyst FH-40A. The loading and commercial use effects of the new pre-hydrotreating catalyst are comprehensively analyzed. The commercial application results show that the pre sulfurized catalyst FH-40A has advantages such as simplifying the start-up steps, shortening the start-up time, and reducing environmental pollution. Compared with the oxidation type pre-hydrotreating catalyst, it can save 40 hours of start-up time. During the start-up process, the concentration of hydrogen sulfide in the circulating hydrogen detected remained at an ideal level. After 6 months of operation, the catalyst exhibited stable and excellent catalytic performance.

Key words: catalytic reforming, pre-hydrogtreating, catalyst, presulfurized