石油炼制与化工 ›› 2025, Vol. 56 ›› Issue (9): 26-33.

• 基础研究 • 上一篇    下一篇

溴功能化微孔材料的CO2吸附分离性能

闫鹏1,2,林敏丽3,陈志胜1,2,吴焕新3,温晓彤3,陈美倩1,丘文杰1   

  1. 1. 肇庆学院环境与化学工程学院

    2. 肇庆学院新能源新材料研究中心

    3. 肇庆学院食品与制药工程学院
  • 收稿日期:2025-02-20 修回日期:2025-04-17 出版日期:2025-09-12 发布日期:2025-08-28
  • 通讯作者: 闫鹏 E-mail:184488609@qq.com

CARBON DIOXIDE ADSORPTION AND SEPARATION PERFORMANCE OF BROMINE-FUNCTIONALIZED MICROPOROUS MATERIAL


  • Received:2025-02-20 Revised:2025-04-17 Online:2025-09-12 Published:2025-08-28

摘要: 将5-溴间苯二甲酸和4,4'-联吡啶的混合配体与硝酸锌在热溶剂条件下进行反应,合成了溴功能化复合材料。采用X射线衍射仪、X射线光电子能谱仪、热重分析仪、傅里叶变换红外光谱仪等对其表征。结果表明:所制备的材料水热稳定性良好;具备微孔结构,最可几孔径为0.35 nm;相较于C2H2,CH4,CO,N2,复合材料对CO2具有明显较好的吸附能力,能够有效分离CO2和其他气体。在273 K、100 kPa下,该材料对CO2的吸附量为48.901 cm3/g。进一步,通过密度泛函理论计算揭示了-Br对CO2的作用机制,以及其与氢键的协同效应。

关键词: 5-溴间苯二甲酸, 4,4′-联吡啶, 溴功能化, 微孔材料, 二氧化碳, 选择性吸附

Abstract: Based on the mixed ligand strategy, a bromine-functionalized composite material was synthesized by the reaction of 5-bromoisophthalic acid, 4,4'-bipyridine, and zinc nitrate under solvothermal conditions. The material was characterized using X-ray diffraction, X-ray photoelectron spectroscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The results showed that the prepared material exhibited good hydrothermal stability and possessed a microporous structure with a most probable pore diameter of 0.35 nm. Compared to C2H2,CH4,CO,N2, it exhibited significantly better adsorption capacity for CO2, enabling effective separation of CO2 from other gases. At 273 K and 100 kPa, the adsorption capacity of the material for CO2 was 48.901 cm3/g. Density functional theory calculations further revealed the mechanism of action of -Br on CO2 and its synergistic effect with hydrogen bonding.

Key words: 5-bromoisophthalic acid, 4,4'-bipyridine, bromine-functionalized, microporous material, carbon dioxide, selective adsorption