石油炼制与化工
• 催化剂 • 上一篇 下一篇
张海礁1,边昌兵2,王海彦2,白英之2
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 采用溶胶-凝胶法制备TiO2-Al2O3复合载体,并用饱和浸渍法制备Ni2P/TiO2-Al2O3催化剂氧化态前躯体。在固定床反应器中采用原位还原技术用H2制备出Ni2P/TiO2-Al2O3催化剂。以喹啉为模型化合物对催化剂的加氢脱氮性能进行评价,结果表明,n(TiO2):n(Al2O3)及Ni2P的负载量对催化剂活性有较大影响,当n(TiO2):n(Al2O3)=1:4、Ni2P的负载量(w)为25% 时,Ni2P/TiO2-Al2O3催化剂表现出最高的催化活性,脱氮率达98%。
关键词: 加氢脱氮, Ni2P, 喹啉, A12O3, TiO2
Abstract: TiO2-Al2O3 mixed supports were prepared by sol-gel method and used in preparation of Ni2P/TiO2-Al2O3 catalysts by co-impregnation.Hydrodenitrogenation(HDN) activity of the catalysts was tested in a fixed bed reactor after in-situ reduction.The results showed that titanium-to-aluminium molar ratio and Ni loadings had remarkable influence on activity of the catalysts.The result showed that the hydrodesulfurization activity of the Ni2P/TiO2-Al2O3 catalyst reached the best HDN activity when the ratio of n(Ti)/n(Al) was 1 to 4 and Ni loadings of 25%. the catalyst exhibited the highest HDS activity, with desulfurization rate of 98%.
Key words: hydrodenitrogenation, nickel phosphide, quinoline, alumina, titania
张海礁1 ,边昌兵2 ,王海彦2 ,白英之2 . Ni2P/TiO2-Al2O3催化剂的制备及加氢脱氮反应性能[J]. 石油炼制与化工, doi: .
/ 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2011/V42/I12/42