TiO2-Al2O3复合载体焙烧温度对Co-Mo加氢脱硫催化剂性能的影响

石油炼制与化工

TiO2-Al2O3复合载体焙烧温度对Co-Mo加氢脱硫催化剂性能的影响

周慧波侯凯湖李会芳

河北工业大学化工学院河北工业大学化工学院河北工业大学化工学院

收稿日期:2008-09-01 修回日期:1900-01-01 出版日期:2009-03-12 发布日期:2009-03-12
通讯作者: 周慧波

EFFECT OF THE CALCINATION TEMPERATURE OF TiO2-Al2O3 COMPLEX SUPPORT ON THE CATALYTIC PERFORMANCE OF Co-Mo HYDRODESULFURIZATION CATALYST

Kai-hu HOU

Received:2008-09-01 Revised:1900-01-01 Online:2009-03-12 Published:2009-03-12

摘要/Abstract

摘要： 采用混捏法制备纳米介孔TiO2-Al2O3复合载体，考察载体焙烧温度对负载型Co-Mo双金属加氢脱硫催化剂性能的影响，并采用N2物理吸附、X射线衍射和吸附吡啶红外光谱技术对复合载体及催化剂进行表征。结果表明，不同温度焙烧的复合载体都具有介孔结构；随焙烧温度的升高，催化剂的比表面积和孔体积减小，平均孔径增大；催化剂中TiO2的平均晶粒尺寸属纳米级且随焙烧温度的升高而增大；复合载体中Al2O3的存在提高了TiO2的晶型转变温度；不同温度焙烧的复合载体表面均主要为L酸中心而几乎没有B酸中心。在微型固定床反应器上对制备的Co-Mo/ TiO2-Al2O3催化剂进行了评价，结果表明，载体经适宜温度焙烧后所得催化剂具有良好的加氢脱硫活性和选择性。

关键词: 焙烧温度, 加氢脱硫, TiO2-Al2O3, 载体

Abstract: Nano-mesoporous TiO2-Al2O3 complex supports were prepared by kneading method. The influence of the calcination temperature of support on the catalytic performance of Co-Mo catalyst was studied. The prepared catalyst samples were characterized by means of N2 adsorption, X-ray diffraction and pyridine adsorption FT-IR. The results indicated that the complex supports calcined at various temperatures were all mesoporous materials with mainly Lewis acid sites. With the increase of support calcined temperature, the specific surface area and pore volume of the catalyst decreased and the average pore diameter increased. In the catalyst the TiO2 particles existed as nanoparticles and its particle size increased with the increase of calcination temperature. The presence of Al2O3 in the complex support could significantly increase the transformation temperature of TiO2 crystal. The prepared catalysts were evaluated in a 10mL fixed-bed reactor and the test results showed that the catalysts prepared with supports calcined at suitable temperature exhibited high hydrodesulfurization activity and selectivity.

Key words: calcination temperature, hydrodesulfurization, TiO2-Al2O3, support

周慧波侯凯湖李会芳. TiO2-Al2O3复合载体焙烧温度对Co-Mo加氢脱硫催化剂性能的影响[J]. 石油炼制与化工, doi: .

Kai-hu HOU . EFFECT OF THE CALCINATION TEMPERATURE OF TiO2-Al2O3 COMPLEX SUPPORT ON THE CATALYTIC PERFORMANCE OF Co-Mo HYDRODESULFURIZATION CATALYST[J]. Petroleum Processing and Petrochemicals, doi: .

[1]	邵志才刘涛胡大为戴立顺. 前置上流式反应器的固定床渣油加氢工艺运行分析及研发建议[J]. 石油炼制与化工, 2024, 55(3): 32-37.
[2]	于松印崔钰函刘洋梁长海李闯. 脂肪酸多相选择性加氢制备脂肪醇研究进展[J]. 石油炼制与化工, 2024, 55(2): 43-51.
[3]	李大东 . 我国炼油工业转型发展的技术策略[J]. 石油炼制与化工, 2024, 55(1): 7-17.
[4]	陈慧玲高辉陈加波王洪臣齐鲁刘国华敖梓鼎牛晓旭. 污水处理IFAS工艺中生物载体对N₂O的减排作用[J]. 石油炼制与化工, 2023, 54(7): 113-122.
[5]	孙进郭蓉陈晓贞尹晓莹段为宇牛世坤. 助剂Co对加氢处理催化剂性能的影响[J]. 石油炼制与化工, 2023, 54(6): 32-38.
[6]	王振杨清河胡大为李会峰刘清河邓中活. 柴油加氢废催化剂再生后梯级应用于渣油加氢脱硫反应的研究[J]. 石油炼制与化工, 2023, 54(5): 36-41.
[7]	李佳奇商辉周静李军. 不同Y分子筛调变氧化铝载体对CoMo加氢脱硫催化剂的影响[J]. 石油炼制与化工, 2023, 54(3): 59-65.
[8]	刘世达侯栓弟. 抗水性天然气汽车尾气催化氧化催化剂研发[J]. 石油炼制与化工, 2023, 54(1): 44-51.
[9]	梁海龙吴彦霞陈玉峰胡利明王春朋. 焙烧温度对MnO_x催化还原NO性能的影响[J]. 石油炼制与化工, 2022, 53(9): 78-82.
[10]	苗鹏杰陈自娇李守柱周健. 利用废渣制备催化裂化催化剂及其催化性能研究[J]. 石油炼制与化工, 2022, 53(9): 72-77.
[11]	贾燕子赵新强邓中活胡大为杨清河李坚. 双峰孔对渣油加氢降残炭催化剂性能的影响[J]. 石油炼制与化工, 2022, 53(3): 9-15.
[12]	郑玥石占敬敬. 气溶胶法炭负载纳米零价铁吸附与化学还原性能研究[J]. 石油炼制与化工, 2022, 53(12): 59-64.
[13]	邓中活任亮邵志才戴立顺孙淑玲户安鹏. 渣油选择性加氢脱硫技术研究[J]. 石油炼制与化工, 2022, 53(11): 24-29.
[14]	张海峰. 半再生催化重整装置热载体系统优化与节能分析[J]. 石油炼制与化工, 2022, 53(10): 82-85.
[15]	张静左童久陆江银. 分子筛镍基催化剂对1,4-丁炔二醇加氢制1,4-丁烯二醇催化性能研究[J]. 石油炼制与化工, 2021, 52(9): 25-30.