Petroleum Processing and Petrochemicals ›› 2018, Vol. 49 ›› Issue (12): 6-9.

Previous Articles     Next Articles

EFFECT OF FLUORINE ON Pt-Sn/Al2O3 CATALYST PERFORMANCE

#br#   


  • Received:2018-04-03 Revised:2018-06-02 Online:2018-12-12 Published:2019-01-03
  • Contact: Ma Aizeng E-mail:maaizeng.ripp@sinopec.com
  • Supported by:
     

Abstract: The Pt-Sn/γ-Al2O3 catalyst with different content of Fluorine was prepared, and the influence of F on the performance of reforming catalysts was investigated. The results of BET, Py-IR, NH3-TPD tests showed that the introduction of F has no significant effect on specific surface area and pore volume of catalyst. But the catalyst acidity is significantly improved. Both Lewis and Bronsted acid sites exist on the F-modified γ-Al2O3 carrier surface, and the acid amount increases with increasing F content. The reaction performance of n-heptane and naphtha showed that LPG yield increases significantly with the increase of fluorine content, the yield of C5+ and aromatics decrease, while coking rate on the catalyst increases. When the fluorine content is greater than 1%, the catalysts exhibit a high selectivity of LPG(C3+C4).

Key words: Fluorine, Pt-Sn reforming catalyst, Liquefied petroleum gas

CLC Number: