PETROLEUM PROCESSING AND PETROCHEMICALS ›› 2024, Vol. 55 ›› Issue (9): 33-41.

Previous Articles     Next Articles

SYNTHESIS OF ORDERED MESOPOROUS CARBON SUPPORTED Pt-MoOx CATALYST AND ITS CATALYTIC PERFORMANCE FOR METHYLCYCLOHEXANE DEHYDROGENATION

  

  • Received:2024-03-04 Revised:2024-04-02 Online:2024-09-12 Published:2024-08-28

Abstract: Using ordered mesoporous carbon (CMK-3) as a carrier, yPt/CMK-3 and MoOx additive-modulated catalyst yPt-zMoOx/CMK-3 (y and z are the number of deposition cycles of Pt and MoOx, respectively) were prepared by atomic layer deposition technology. The impact of the number of deposition cycles on the dispersion of the Pt metal and the catalytic performance for the dehydrogenation of methylcyclohexane was studied. The results showed that optimal Pt dispersion and an appropriate amount of atomically dispersed MoOx additives could significantly improved the performance of Pt-based catalysts. Compared with 10Pt/CMK-3, the dehydrogenation rate (amount of H2 produced per unit mass of Pt per unit time) on the catalyst 10Pt-1MoOx/CMK-3 increased from 79.02 mol/(g.h) to 97.88 mol/(g.h), and the methylcyclohexane conversion rate increased from 71% to 91%. The addition of MoOx additive had little effect on the dispersion of Pt nanoparticles, mainly increased the electron density on the Pt surface and decreased the activation temperature of catalyst. In addition, the MoOx additives can promote the desorption of H2 on the catalyst surface through hydrogen overflow, thus increasing the yield of H2. The research provides a theoretical basis for the design of efficient methylcyclohexane dehydrogenation catalysts.

Key words: methylcyclohexane, organic liquid hydrogen storage carrier, dehydrogenation catalyst, additive, ordered mesoporous carbon