PROGRESS OF METAL-ORGANIC FRAMEWORK MATERIALS FOR FUEL DESULFURIZATION

Abstract

Abstract: With the development of society, environmental protection is receiving increasing attention, and higher requirements have been put forward for the cleanliness of traditional energy sources. There are a lot of sulfur-containing organic compounds in gasoline, diesel, jet fuel and other fuels, which is one of the main causes of environmental pollution. Therefore, the method of removing sulfide in fuels has been studied. Compared with other desulfurization methods, oxidative desulfurization and adsorptive desulfurization have the advantages of high desulfurization efficiency, mild reaction conditions and stronger operability and practicability. Metal organic framework material (MOFs) is a new kind of material, which has many advantages such as high porosity, adjustable pore structure and easy modification, so it has attracted much attention in recent years. In this paper, the research of MOFs in the field of adsorptive desulfurization and oxidative desulfurization in recent years was reviewed, and the prospect of MOFs in the field of desulfurization was prospected.

Key words: adsorptive desulfurization, oxidative desulfurization, sulfur-containing organics, metal-organic frameworks, fuel

References

[1]Carl-Henry G.Burning Up: A Global History of Fossil Fuel Consumption[J].Journal of American History, 2020, 106(4):- [2]Hassan S, Azam K, Akhtar M N, et al.A Review on the Methods in Diesel Desulfurization[J].Current Analytical Chemistry, 2021, 17(6):- [3]Lyu Y C, Sun Z W, Xin Y, et al.Reactivation of spent S-Zorb adsorbents for gasoline desulfurization[J].Chemical Engineering Journal, 2019, 374:- [4]Jeff T.Warning from COP27: fossil-fuel emissions have hit a new high[J].Nature, 2022, :- [5]Reza K N M, Hadi S M, Asadi R A, et al.Desulfurization of liquid fuels using aluminum modified mesoporous adsorbent: towards experimental and kinetic investigations[J].Scientific Reports, 2021, 11(1), 2021, 11(1):- [6]Jain M, Gupta S K.Desulfurization of FCC gasoline by using spiral wound pervaporation module: Removal of different types of sulfur containing species[J].Chemical Engineering Research and Design, 2018, 136:105-118 [7]Md. A remarkable adsorbent for removal of nitrogenous compounds from fuel: A metal–organic framework functionalized both on metal and ligand[J].Chemical Engineering Journal, 2021, 404:- [8]Daria P, Valentina L, Evgenii I, et al.Energy Basics of Catalytic Hydrodesulfurization of Diesel Fuels[J].Catalysts, 2022, 12(11):- [9]Roman F F, Diaz de Tuesta Jose L, Silva Adrián M T, et al.Carbon-Based Materials for Oxidative Desulfurization and Denitrogenation of Fuels: A Review[J].Catalysts, 2021, 11(10):- [10]Yang Z D, Liu Z G, Aleksandra S, et al.Microbiological Sulfide Removal—From Microorganism Isolation to Treatment of Industrial Effluent[J].Microorganisms, 2021, 9(3):- [11]Faezeh M, Salman M, Amin S M, et al.Current status and future prospects of oxidative desulfurization of naphtha: a review[J].Process Safety and Environmental Protection, 2022, 12(14):- [12]Wang E L, Yang F H, Song M Y, et al.Recent advances in the unsupported catalysts for the hydrodesulfurization of fuel[J].Fuel Processing Technology, 2022, 235:- [13]Sharif A B, Omar H L, Kosar H A, et al.Oxidative Desulfurization of Real High-Sulfur Diesel Using Dicarboxylic Acid/H2O2 System[J].Processes, 2022, 10(11):- [14]Hao L, Hurlock M J, Ding G, et al.Metal-organic frameworks towards desulfurization of fuels[J].Topics in Current Chemistry, 2020, 378(1):17- [15]Zhang Y Q, Yang W L, Yang X, et al.Rational design of efficient polar heterogeneous catalysts for catalytic oxidative-adsorptive desulfurization in fuel oil[J].Applied Catalysis A, General, 2022, 632:- [16]Fang M Y, Montoro C, Semsarilar M.Metal and covalent organic frameworks for membrane applications[J].Membranes, 2020, 10(5):55- [17]Kalaj M, Cohen S M.Postsynthetic modification: An enabling technology for the advancement of metal-organic frameworks[J].ACS Central Science, 2020, 6(7):1046-1057 [18]Lee K X, Valla J A.Adsorptive desulfurization of liquid hydrocarbons using zeolite-based sorbents: a comprehensive review[J].Reaction Chemistry & Engineering, 2019, 4(8):1357-1386 [19]Azeez M O, Abdul K T, Khalid A, et al.Synergistic effect of nitrogen and molybdenum on activated carbon matrix for selective adsorptive Desulfurization: Insights into surface chemistry modification[J].Arabian Journal of Chemistry, 2022, 15(1):- [20]Yin L X, Xu J C, Zhang B, et al.A facile fabrication of highly dispersed CeO2/SiO2 aerogel composites with high adsorption desulfurization performance[J].Chemical Engineering Journal, 2022, 428:- [21]Song Y, Peng B, Yang X, et al.Trail of sulfur during the desulfurization via reactive adsorption on Ni/ZnO[J].Green Energy & Environment, 2020, :- [22]Cychosz K A, Wong F, Matzger A J.Liquid phase adsorption by microporous coordination polymers: Removal of organosulfur compounds[J].Journal of the American Chemical Society, 2008, 130(22):6938-6939 [23]Cychosz K A, Wong F, Matzger A J.Enabling cleaner fuels: desulfurization by adsorption to microporous coordination polymers[J].Journal of the American Chemical Society, 2009, 131(40):14538-14543 [24]Gao Y, Wu J F, Wang S, et al.Design and fabrication of a novel water- and heat-resistant Cu-based coordination compound for dibenzothiophene capture[J].Energy Fuels, 2020, 34(4):4508-4515 [25]Kabtamu D M, Wu Y N, Chen Q, et al.Facile Upcycling of Hazardous Cr-Containing Electroplating Sludge into Value-Added Metal–Organic Frameworks for Efficient Adsorptive Desulfurizatio[J].ACS Sustainable Chemistry & Engineering, 2020, 8(33):- [26]Bagheri M, Masoomi M Y, Morsali A.High organic sulfur removal performance of a cobalt based metal-organic framework[J].Journal of Hazardous Materials, 2017, 331:142-149 [27]Tian F, Ru Q, Qiao C, et al.Adsorption desulfurization of model gasoline by metal–organic framework Ni3(BTC)2[J].Journal of Energy Chemistry, 2019, 32:8-14 [28]Xu W, Gang L, Li W, et al.Facile room temperature synthesis of metal–organic frameworks from newly synthesized copperzinc hydroxide and their application in adsorptive desulfurization[J].RSC Advances, 2016, 6(44):37530-37534 [29] Yj A, Jw A, Jw A, et al.Highly efficient capture of benzothiophene with a novel water-resistant-bimetallic Cu-ZIF-8 material - ScienceDirect[J].Inorganica Chimica Acta, 2020, 503:- [30]Zhang X F, Wang Z, Feng Y, et al.Adsorptive desulfurization from the model fuels by functionalized UiO-66(Zr)[J].Fuel, 2018, 234(DEC.15):256-262 [31]Huo Q, Li J S, Qi X R, et al.Cu, Zn-embedded MOF-derived bimetallic porous carbon for adsorption desulfurization[J].Chemical Engineering Journal, 2019, 378:- [32]Shi S, Li Y X, Li S S, et al.Fabrication of Cu+ sites in confined spaces for adsorptive desulfurization by series connection double-solvent strategy[J].Green Energy & Environment, 2020, :- [33]Habimana F, Shi D, Ji S.Synthesis of Cu-BTC/Mt composites porous materials and their performance in adsorptive desulfurization process[J].Applied Clay Science, 2018, 152:303-310 [34]Feng T, Wang Y, Wu Y, et al.A feasible linker transformation strategy towards the formation of Cu2O nanoparticles for immobilization in hierarchical CuBTC for adsorption desulfurization[J].Journal of Materials Chemistry A, 2020, 8(17):8678-8683 [35]Aslam S, Subhan F, Yan Z, et al.Dispersion of nickel nanoparticles in the cages of metal-organic framework: An efficient sorbent for adsorptive removal of thiophene[J].Chemical Engineering Journal, 2017, 315:469-480 [36]Gao Y, Wu J F, Xiong X Q, et al.Enhanced dibenzothiophene capture with multimetal–organic frameworks in the presence of benzene and octane[J].Industrial & Engineering Chemistry Research, 2020, 59(16):7849-7856 [37]Chen M, Zhang Y, Chen J, et al.Investigation of attapulgitemodified Fe3O4MOF-199 and its adsorptive desulfurization performance[J].Journal of Materials Science, 2022, 57(7):4528-4540 [38]Zhu L, Zhu L, Jia X, et al.Structure and adsorptive desulfurization performance of the composite material MOF-5@AC[J].New Journal of Chemistry, 2018, :- [39]Song H, Li X, Jiang B, et al.Preparation of Novel and Highly Stable PyMOF and Its Adsorptive Desulfurization Performance[J].Industrial & Engineering Chemistry Research, 2019, 58(42):19586-19598 [40]Bhadra B N, Jhung S H.Oxidative desulfurization and denitrogenation of fuels using metal-organic framework-based-derived catalysts[J].Applied Catalysis B: Environmental, 2019, 259(15):118021-118045 [41]Sun J, Abednatanzi S, Voort P, et al.POM@MOF hybrids: Synthesis and applications[J].Catalysts, 2020, 10(5):578-608 [42]Vallés G C, Santiago P A, álvaro M, et al.MIL-101(Cr)-NO2 as efficient catalyst for the aerobic oxidation of thiophenols and the oxidative desulfurization of dibenzothiophenes[J].Applied Catalysis A: General, 2020, 590(25):117340-117947 [43]Gomez P, Santiago P, Navalón S, et al.MIL-101 promotes the efficient aerobic oxidative desulfurization of dibenzothiophenes[J].Green Chemistry, 2016, 18(2):508-515 [44]Ye G, Sun Y Y, Zhang D, et al.Hierarchical porous titanium terephthalate based material with highly active sites for deep oxidative desulfurization[J].Microporous and Mesoporous Materials, 2018, 270:241-247 [45]Li X, Gu Y, Chu H, et al.MFM-300(V) as an active heterogeneous catalyst for deep desulfurization of fuel oil by aerobic oxidation[J].Applied Catalysis A: General, 2019, 584(25):117152-117157 [46]Chu L, Guo J Z, Wang L Y, et al.Synthesis of defected UIO‐66 with boosting the catalytic performance via rapid crystallization[J].Applied Organometallic Chemistry, 2021, 36(3):- [47]Gu Y, Ye G, Xu W, et al.Creation of active sites in MOF-808(Zr) by a facile route for oxidative desulfurization of model diesel oil[J].ChemistrySelect, 2020, 5(1):244-251 [48]Hao L, Hurlock M, Li X, et al.Efficient oxidative desulfurization using a mesoporous Zr-based MOF[J].Catalysis Today, 2020, 350:64-70 [49]Misra A, Kozma K, Streb C, et al.Beyond Charge Balance: Counter-Cations in Polyoxometalate Chemistry[J].Angewandte Chemie International Edition, 2019, 59(2):596-612 [50]Fu J, Yu G, Ma W, et al.Syntheses and ultra-deep desulfurization performance of sandwich-type polyoxometalate-based TiO2 nanofibres[J].Journal of Materials Science, 2018, 53(22):- [51]Lu Y K, Yue C L, Liu B X, et al.The encapsulation of POM clusters into MIL-101(Cr) at molecular level: LaW10O36@MIL-101(Cr), an efficient catalyst for oxidative desulfurization[J].Microporous and Mesoporous Materials, 2021, 311:- [52]Mohammadi N F, Shahrokh S, Mehran .Cobalt-based sandwich-type polyoxometalate supported on amino-silane decorated magnetic graphene oxide: A recoverable catalyst for extractive-catalytic oxidative desulfurization of model oil[J].Journal of Environmental Chemical Engineering, 2022, 10(3):- [53]Gao Y, Liu Z, Hu G, et al.Design and synthesis heteropolyacid modified mesoporous hybrid material CNTs@MOF-199 catalyst by different methods for extraction-oxidation desulfurization of model diesel[J].Microporous and Mesoporous Materials, 2020, 291(1):109702-109713 [54]Chang X, Yang X F, Qiao Y, et al.Confined heteropoly blues in defected Zr-MOF (bottle around ship) for high-efficiency oxidative desulfurization[J].Small, 2020, 16(14):1906432-1906444 [55]Peng Y L, Liu J, Zhang H F, et al.A size-matched POM@MOF composite catalyst for highly efficient and recyclable ultra-deep oxidative fuel desulfurization[J].Inorganic Chemistry Frontiers, 2018, 5(7):1563-1569 [56]Lin Z J, Zheng H Q, Chen J, et al.Encapsulation of phosphotungstic acid into metal-organic frameworks with tunable window sizes: screening of PTA@MOF catalysts for efficient oxidative desulfurization[J].Inorganic Chemistry, 2018, 57(20):13009-13019 [57]Qi Z, Qiu T, Wang H, et al.Synthesis of ionic-liquid-functionalized UiO-66 framework by post-synthetic ligand exchange for the ultra-deep desulfurization[J].Fuel, 2020, 268:- [58]Liu S Q, Li X N, Zhang H.Synergistic effects of MOF-76 on layered double hydroxides with superior activity for extractive catalytic oxidative desulfurization[J].New Journal of Chemistry, 2020, 44(16):6269-6276 [59]Li S, Wang W, Zhao J S.Highly effective oxidative desulfurization with magnetic MOF supported W-MoO3 catalyst under oxygen as oxidant[J].Applied Catalysis B: Environmental, 2020, 277(15):119224-119233 [60]Wang C, Li A, Ma Y, et al.Preparation of formate-free PMA@MOF-808 catalysts for deep oxidative desulfurization of model fuels[J].Environmental Science and Pollution Research, 2022, 29(26):39427-39440 [61]Lu Y, Yue C, Liu B, et al.The encapsulation of POM clusters into MIL-101(Cr) at molecular level: LaW10O36@MIL-101(Cr), an efficient catalyst for oxidative desulfurization[J].Microporous and Mesoporous Materials, 2021, 311:110694- [62]Gu Y, Ye G, Xu W, et al.Creation of Active Sites in MOF‐808(Zr) by a Facile Route for Oxidative Desulfurization of Model Diesel Oil[J].ChemistrySelect, 2020, 5(1):244-251 [63]Ji H F, Liu S T, Shi H F, et al.Phosphomolybdic acid-based sulfur-containing metal–organic framework as an efficient catalyst for dibenzothiophene oxidative desulfurization[J].Journal of Sulfur Chemistry, 2022, 43(3):314-326 [64]Sun M, Chen W C, Zhao L, et al.A PTA@MIL-101(Cr)-diatomite composite as catalyst for efficient oxidative desulfurization[J].Inorganic Chemistry Communications, 2018, 87:30-35 [65]Yue S, Song Q, Zang S, et al.Synthesis of polyoxomolybdate-quinoline compounds beads for catalytic oxidative desulfurization[J].Molecular Catalysis, 2018, 455:88-94 [66]Yan G A, Zhe L A, Gh B, et al.Design and synthesis heteropolyacid modified mesoporous hybrid material [emailprotected] catalyst by different methods for extraction-oxidation desulfurization of model diesel[J].Microporous and Mesoporous Materials, 2020, 291:109702- [67]Lin Z J, Zheng H Q, Chen J, et al.Encapsulation of Phosphotungstic Acid into Metal–Organic Frameworks with Tunable Window Sizes: Screening of PTA@MOF Catalysts for Efficient Oxidative Desulfurization[J].Inorganic Chemistry, 2018, 57:- [68]Wang C, Li A, Ma Y, et al.Preparation of formate-free PMA@MOF-808 catalysts for deep oxidative desulfurization of model fuels[J].Environmental Science and Pollution Research, 2022, 29(26):39427-39440