石油炼制与化工

• 催化剂 • 上一篇    下一篇

PS-Ⅶ型连续重整催化剂的工业应用

周明秋 陈国平 马爱增   

  1. 扬子石油化工有限公司芳烃厂 扬子石油化工有限公司芳烃厂 石油化工科学研究院
  • 收稿日期:2007-09-11 修回日期:1900-01-01 出版日期:2008-04-12 发布日期:2008-04-12
  • 通讯作者: 马爱增

Commercial Application of PS-VII Catalyst for Continuous Catalyst Regeneration Reforming Unit

Ma Aizeng   

  • Received:2007-09-11 Revised:1900-01-01 Online:2008-04-12 Published:2008-04-12
  • Contact: Ma Aizeng

摘要: 石油化工科学研究院开发的PS-Ⅶ连续重整催化剂在扬子石油化工股份有限公司1.39Mt/a装置上进行了首次工业应用。工业运转结果和标定结果均表明,PS-Ⅶ型连续重整催化剂具有良好的耐磨性能和比表面积稳定性;与原使用催化剂相比,在原料芳潜较低的情况下,PS-Ⅶ型催化剂的C6+以上收率提高了3.32个百分点,氢气产率增加了0.61个百分点,芳烃产率增加了1.53个百分点,积炭速率降低了27.32%,解决了重整装置扩能后再生能力受限制的问题,使重整装置得以保持长期高负荷运转。

关键词: 重整, 催化剂, 连续, 再生, 工业应用

Abstract: The first commercial application of PS-VII catalyst developed by Research Institute of Petroleum Processing was carried out in the 1.39Mt/a continuous catalyst regeneration (CCR) reforming unit of Yangzi Petrochemical Company. The results of performance test and commercial run showed that PS-VII catalyst exhibited high attrition resistant and good hydrothermal stability. As compared with the original imported catalyst, using PS-VII catalyst even with a poorer feedstock, the yields of C6+, hydrogen and aromatics increased 3.32, 0.61 and 1.53 percentage points, respectively; at the same time the coke deposition rate reduced 27.32%. Thus, the problem of insufficient regeneration capacity was solved and the unit could be run under high load for a long period.

Key words: reforming, catalyst, continuous, regeneration, full scale