›› 2015, Vol. 46 ›› Issue (12): 10-13.

• 催化剂 • 上一篇    下一篇

重油高效转化FCC催化剂的工业应用

沈兴,武利春,刘建,夏建平   

  1. 中国石油呼和浩特石化公司
  • 收稿日期:2015-06-04 修回日期:2015-06-21 出版日期:2015-12-12 发布日期:2015-11-26
  • 通讯作者: 沈兴 E-mail:shenxhsh@petrochina.com.cn

COMMERCIAL APPLICATION OF HIGH EFFICIENT HEAVY OIL CONVERSION FCC CATALYST

  • Received:2015-06-04 Revised:2015-06-21 Online:2015-12-12 Published:2015-11-26

摘要: 针对中国石油呼和浩特石化公司2.8 Mt/a催化裂化装置研究开发了一种新型重油高效转化催化剂B。在催化裂化装置的工业应用结果表明,与装置原催化剂A相比,使用催化剂B后,在原料性质变重变差和回炼油浆的情况下,生焦量仍降低0.22百分点,轻质液体收率增加0.41百分点,丙烯收率(对原料)提高0.49百分点,汽油研究法辛烷值增加1.3个单位,催化剂单耗降低0.26 kg/t。

关键词: 催化裂化 , 高效转化, 催化剂

Abstract: A new high efficient heavy oil conversion catalyst B was developed and commercialized for a RFCC unit with a capacity of 2.8 Mt/a in Petrochina Hohhot Petrochemical Company. The commercial application results show that though the worse quality feed was used and the slurry was back recycled, the coke yield is 0.22% lower than the results of the original catalyst A, the light liquid yield increases by 0.41%, propylene yield increases by 0.49%, RON of FCC gasoline improves by 1.3, and the unit consumption of catalyst decreases by 0.26 kg/t.

Key words: fluid catalytic cracking, high efficient conversion, catalyst