石油炼制与化工 ›› 2015, Vol. 46 ›› Issue (4): 51-54.

• 催化剂 • 上一篇    下一篇

TiO2/SBA-15光催化氧化汽油脱硫的研究

王喆,纪桂杰,沈健   

  1. 辽宁石油化工大学石化学院
  • 收稿日期:2014-09-19 修回日期:2014-10-24 出版日期:2015-04-12 发布日期:2015-03-20
  • 通讯作者: 沈健 E-mail:412128550@qq.com

STUDY OF PHOTOCATALYTIC OXIDATION DESULFURIZATION OF THIOPHENE WITH TiO2/SBA-15

  • Received:2014-09-19 Revised:2014-10-24 Online:2015-04-12 Published:2015-03-20

摘要: 以介孔分子筛SBA-15为载体、钛酸四正丁酯为钛源,采用浸渍法制备TiO2/SBA-15催化剂,通过XRD、N2吸附-脱附等手段对吸附剂的结构进行分析,结果表明,所制备的TiO2/SBA-15样品仍保留着母体SBA-15的结构。以含噻吩的异辛烷溶液座位模拟汽油,以质量分数为30% 的H2O2为氧化剂、TiO2/SBA-15为催化剂,在紫外灯照射下对模拟汽油进行催化氧化脱硫,通过静态实验确定了反应的最佳工艺条件,即反应温度50 ℃、反应时间120 min 、催化剂用量2 g/L、O/S摩尔比8.5:1,在该条件下,模拟汽油的脱硫率可达88.2%,表明TiO2/SBA-15具有很高的光催化氧化脱硫性能。

Abstract: TiO2/SBA-15 photocatalysts were synthesized by impregnation method using tetra-n-butyl titanate (TnBT) as titanium source. The properties of the catalyst were characterized by XRD and BET. The results show that TiO2/SBA-15 catalyst keeps the structure of the support SBA-15. The photocatalytic oxidative desulfurization performance of the catalyst was investigated using thiophene isooctane solution as a simulated oil and H2O2 as an oxidant under UV light irradiation. The process conditions of the reaction were determined by static experiment. The optimum reaction conditions are as follows: 50 ℃,120 min, catalyst dosage of 2 g/L(feed), the O/S molar ratio of 8.5:1. Under the conditions, the desulfurizition rate of simulated oil is up to 88.2%, indicating that TiO2/SBA-15 has a good performance of photocatalytic oxidation desulfurization.