芳烃抽提蒸馏工艺溶剂环丁砜中重组分的脱除

石油炼制与化工 ›› 2020, Vol. 51 ›› Issue (12): 6-11.

芳烃抽提蒸馏工艺溶剂环丁砜中重组分的脱除

高思亮,唐文成,赵明,田龙胜

中国石化石油化工科学研究院

收稿日期:2020-06-09 修回日期:2020-06-12 出版日期:2020-12-12 发布日期:2020-12-29
通讯作者: 高思亮 E-mail:gaosiliang.ripp@sinopec.com
基金资助:

REMOVAL OF HEAVY COMPONENTS FROM SULFOLANE IN BTX EXTRACT-DISTILLATION PROCESS

Gao Siliang,Tang Wencheng,Zhao Ming,Tian Longsheng

Received:2020-06-09 Revised:2020-06-12 Online:2020-12-12 Published:2020-12-29
Contact: Gao Siliang E-mail:gaosiliang.ripp@sinopec.com
Supported by:

摘要/Abstract

摘要： 针对加氢裂解汽油芳烃抽提蒸馏工艺中重组分在贫溶剂中的积累问题，分别考察抽余油反萃取、水洗贫溶剂、水洗富溶剂、抽余油反萃取-水洗耦合4种方法对环丁砜溶剂的净化再生效果。结果表明，重组分中直链烷基苯最容易被脱除，多环芳烃的分离难度最大；温度对重组分的脱除有一定影响，且采用不同方法时的影响程度不同；4种方法中抽余油反萃取-水洗耦合法的再生效果最优，能够在油剂比（抽余油与待再生贫溶剂的质量比）为1.0、水洗比（水洗水与待再生贫溶剂的质量比）为1.0、温度为40℃的条件下，将贫溶剂中的环丁砜质量分数从94.25%提升至99.86%，达到工业生产所需循环贫溶剂的纯度要求。

关键词: 环丁砜, 重组分, 抽余油, 反萃取, 水洗

Abstract: The accumulation of heavy components in lean solvent occurs in the extraction-distillation process of pyrolysis gasoline after hydrogenation. The purification effect of sulfolane solvent were investigated by four methods: back-extraction of reffinate, water washing of lean solvent, water washing of rich solvent, and combination of back-extraction of raffinate and water washing. The results showed that among all the heavy components，the linear alkylbenzenes were the easiest to remove，while the separation of polycyclic aromatics were the most difficult；temperature had a certain influence on the removal of the heavy components，and the effect was different in different methods. The purification results of back-extraction and water washing coupling methods for raffinate were the best. The mass fraction of sulfolane in the lean solvent can increase from 94.25% to 99.86% under the following conditions：the ratio of raffinate to lean solvent of 1.0，the washing water to the solvent ratio of 1.0，the temperature of 40℃. The purified solvent meets the purity requirement of recycled lean solvent for industrial production.

Key words: sulfolane, heavy components, raffinate, back-extraction, water washing

中图分类号:

高思亮唐文成赵明田龙胜. 芳烃抽提蒸馏工艺溶剂环丁砜中重组分的脱除[J]. 石油炼制与化工, 2020, 51(12): 6-11.

Gao Siliang Tang Wencheng Zhao Ming Tian Longsheng. REMOVAL OF HEAVY COMPONENTS FROM SULFOLANE IN BTX EXTRACT-DISTILLATION PROCESS[J]. Petroleum Processing and Petrochemicals, 2020, 51(12): 6-11.

[1]	王晶刘生海齐欢高斌李东郭晓峰王旭张君兰. 甲醇制烯烃工业装置水洗水系统问题分析及解决方案[J]. 石油炼制与化工, 2023, 54(8): 37-42.
[2]	高腾飞. 柴油加氢装置反应系统铵盐结垢原因分析与处理[J]. 石油炼制与化工, 2023, 54(5): 120-124.
[3]	郭守权李澜鹏. 杂质对C₅抽余油加氢反应的影响及热力学分析[J]. 石油炼制与化工, 2021, 52(8): 37-41.
[4]	魏书梅徐亚荣李琪蓉朱学栋. 甲醇耦合抽余油芳构化反应催化剂制备及其催化性能研究[J]. 石油炼制与化工, 2021, 52(6): 11-17.
[5]	张卉蔡烈奎. 糠醛精制抽余油生产环烷基橡胶增塑剂的工艺优化研究[J]. 石油炼制与化工, 2019, 50(5): 57-60.
[6]	田昌旻刘喆. 重整生成油液相脱氯剂DL-1在连续催化重整装置中的工业应用[J]. 石油炼制与化工, 2019, 50(12): 12-16.
[7]	何龙冯靓婧赵存胜. Pd/Ca-Al2O3催化剂的制备及其C5抽余油加氢反应性能研究[J]. , 2018, 49(9): 64-68.
[8]	徐彤艾抚宾乔凯祁文博. C5抽余油与非芳烃汽油混合加氢工艺技术研究与工业应用[J]. 石油炼制与化工, 2017, 48(4): 47-51.
[9]	王宾张传磊赵智辉. 酸性水罐顶气体处理技术的应用[J]. , 2017, 48(10): 91-94.
[10]	姚二伟陈文艺刘慧珍刘莹. 热稳定添加剂对劣化环丁砜的影响及SPSS软件应用研究[J]. 石油炼制与化工, 2016, 47(7): 48-52.
[11]	程文嘉杨元彬李健刘明. 重油催化裂化分馏塔结盐在线水洗技术的研究[J]. 石油炼制与化工, 2016, 47(12): 7-10.
[12]	杨涛孙艳朋翟志清程前进. 延迟焦化装置分馏塔腐蚀原因分析及改进措施[J]. 石油炼制与化工, 2013, 44(3): 75-78.
[13]	竺家培,刘仕成. 苯抽提蒸馏装置运行分析及高负荷运转解决措施[J]. 石油炼制与化工, 2011, 42(7): 17-20.
[14]	金学坤1 ,马凤云1 ,刘景梅1 ,冉文斌2 . 以加氢抽余油为原料生产工业级正己烷过程节能模拟研究[J]. 石油炼制与化工, 2011, 42(6): 77-83.
[15]	郭振莲1 ,张孔远2 ,周洋2 ,刘晨光2 . Pt/Al2O3-TiO2催化剂制备及其对重整抽余油的加氢性能[J]. 石油炼制与化工, 2011, 42(12): 36-41.