石油炼制与化工 ›› 2012, Vol. 43 ›› Issue (7): 8-11.
• 催化剂 • 上一篇 下一篇
赵广乐,赵阳,毛以朝,胡志海
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要： 针对以加氢裂化尾油作蒸汽裂解原料为目标的加氢裂化装置，开发加氢裂化催化剂RHC-3。在中试装置上考察RHC-3催化剂在高压下对劣质原料的催化性能。结果表明，采用RHC-3催化剂可获得理想的产品分布和优质的产品，选择性好，加氢裂化尾油质量显著改善。RHC-3催化剂在2.0 Mt/a高压加氢裂化装置上的工业应用结果表明，采用该催化剂，在保持较高尾油收率的情况下，可获得低BMCI值、高链烷烃含量的优质尾油。
关键词: 尾油, 催化剂, 反应性能, 加氢裂化 , 工业应用
Abstract: New hydrocracking catalyst RHC-3 was developed for hydrocracking unit to produce tail oil used as steam cracking feedstock. The flexibility of processing inferior feedstock under high pressure by RHC-3 catalyst was studied in a hydrocracking pilot plant. Test data showed that good product slates and product properties were obtained by using RHC-3 catalyst, particularly the properties of tail oil were improved significantly. The application results of RHC-3 catalyst in a 2.0 Mt/a high pressure hydrocracking unit indicated that good quality tail oil with low BMCI value and high alkane content was produced; meanwhile, the yield of tail oil could be kept at a high level.
Key words: tail oil, catalyst, reaction performance, hydrocracking , commercial application
赵广乐 赵阳 毛以朝 胡志海. 加氢裂化催化剂RHC-3在高压下的反应性能研究与工业应用[J]. 石油炼制与化工, 2012, 43(7): 8-11.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2012/V43/I7/8
京公网安备 11010802027553号
