石油炼制与化工 ›› 2013, Vol. 44 ›› Issue (4): 34-38.
• 基础研究 • 上一篇 下一篇
刘昌呈,王春明,马爱增
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 对丙烷脱氢反应进行了热力学分析,计算了不同温度下的标准平衡常数和不同条件下的平衡转化率,并通过实验研究了不同工艺条件对Pt-Sn-K/Al2O3催化剂活性的影响。结果表明:高温和低压有利于反应的进行,但温度过高会导致裂解等副反应增多,使丙烯选择性下降,压力过低会造成脱氢反应产生的积炭前身物增多,催化剂失活速率加快;低空速下物料在反应器中停留时间较长,高温裂解反应增多,导致丙烯选择性下降;提高氢烃比能够降低催化剂的积炭速率,但同时也会降低丙烷的转化率。
Abstract: Thermodynamic analysis was carried out for the reaction of propane dehydrogenation, and the standard equilibrium constants and the equilibrium conversion at different conditions were calculated. In addition, the influence of operating conditions on the performance of the catalyst was studied. The results showed that high temperature and low pressure were favorable to the dehydrogenation reaction. But at higher temperature, the side reactions such as cracking were increased, and the lower pressure could increase the precursor of coke, which resulted to the increase of coke on the catalyst and the decrease of the activity of the catalyst. At low space velocity, the residence time of reactants in the reactor was longer, resulting to the increase of cracking reactions and the decrease of the selectivity. The increase of hydrogen hydrocarbon ratio could decrease the coke rate of the catalyst and the conversion of propane.
刘昌呈 王春明 马爱增. 工艺条件对Pt-Sn-K/Al2O3催化剂丙烷脱氢性能的影响[J]. 石油炼制与化工, 2013, 44(4): 34-38.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2013/V44/I4/34