石油炼制与化工 ›› 2017, Vol. 48 ›› Issue (3): 22-25.

• 加工工艺 • 上一篇    下一篇

印尼油砂油热转化改质降黏研究

任灿,石薇薇,曹祖宾,刘思彤   

  1. 辽宁石油化工大学化学化工与环境学部
  • 收稿日期:2016-08-30 修回日期:2016-09-26 出版日期:2017-03-12 发布日期:2017-02-24
  • 通讯作者: 曹祖宾 E-mail:caozubin1962@163.com
  • 基金资助:
     

RESEARCH ON VISCOSITY REDUCTION OF INDONESIAN TAR SAND OIL BY THERMAL CONVERSION

    

  1.  
  • Received:2016-08-30 Revised:2016-09-26 Online:2017-03-12 Published:2017-02-24
  • Supported by:
     

摘要: 采用高压釜作为减黏反应器对印尼油砂油进行减黏改质处理,考察反应温度为380~440 ℃、反应时间为5~60 min条件下的减黏率、结焦率和反应深度。结果表明,在反应温度为420 ℃、反应时间为30 min的条件下,结焦率为0.91%,产品油50 ℃动力黏度为395 mPa?s,减黏率为99.62%。

关键词: 油砂油, 重油, 减黏裂化, 结焦

Abstract: The properties of Indonesian tar sand oil were analyzed by thermogravimetric analysis. The visbreaking process for upgrading the oil was tested by autoclave at the conditions of 380-440 ℃,N2 pressure of (1±0.1) MPa, reaction time of 5-60 min, and stirring rate of 200 r/min to investigate the changes of viscosity reduction rate, coking rate, and reaction depth. The results show that at the reaction conditions of 420 ℃, 30 min, the coking rate is 0.91%, the kinetic viscosity of product is 395 mPa?s at 50 ℃ and the viscosity reduction rate reaches 99.62%.

Key words: tar sand oil, heavy oil, visbreaking, coking

中图分类号: