石油炼制与化工 ›› 2017, Vol. 48 ›› Issue (8): 20-23.

• 加工工艺 • 上一篇    下一篇

焦化干气加氢制备乙烯原料工艺技术研究与工业应用

徐彤,艾抚宾,乔凯,祁文博   

  1. 中国石化抚顺石油化工研究院
  • 收稿日期:2017-02-21 修回日期:2017-03-09 出版日期:2017-08-12 发布日期:2017-07-19
  • 通讯作者: 徐彤 E-mail:xutong.fshy@sinopec.com
  • 基金资助:
     

RESEARCH AND APPLICATION OF COKER DRY GAS HYDROFINING TO PREPARE FEEDSTOCK FOR ETHYLENE PRODUCTION

    

  1.  
  • Received:2017-02-21 Revised:2017-03-09 Online:2017-08-12 Published:2017-07-19
  • Supported by:
     

摘要: 以焦化干气为原料,采用中国石化抚顺石油化工研究院开发的LH-10D焦化干气加氢专用催化剂,在反应温度为240~300 ℃、反应压力为3.5 ~7.0 MPa、气体体积空速为600~1 300 h-1的条件下,进行了焦化干气加氢制备乙烯原料的实验研究。加氢后焦化干气反应产物中烯烃质量分数不大于1.0%;氧质量浓度不大于1.0 mg/m3;1 800 h的稳定性实验结果表明该催化剂具有良好的活性稳定性。

关键词: 焦化干气, 加氢, 乙烯原料

Abstract: The coker dry gas hydrofining process and appropriative catalyst LH-10D, developed by FRIPP, to prepare the feedstock for ethylene production was introduced. The optimized technical conditions are: a temperature of 240-300 ℃,a pressure of 3.5-7.0 MPa , a GHSV of 600-1 300 h-1. Under the conditions, the olefin content of the product is less than 1.0% and oxygen content is less than 1.0 mg/m3. The 1 800 h long-running test proves a good activity and stability of the catalyst.

Key words: coker dry gas, hydrogenation, feedstock for ethylene production

中图分类号: