›› 2018, Vol. 49 ›› Issue (12): 1-5.

• 催化剂 •    下一篇

LTAG工艺专用催化剂SLG-1的研发与应用

王鹏,严加松,于善青,田辉平,龙军   

  1. 中国石化石油化工科学研究院
  • 收稿日期:2018-04-17 修回日期:2018-06-25 出版日期:2018-12-12 发布日期:2019-01-03
  • 通讯作者: 王鹏 E-mail:wangpeng.ripp@sinopec.com
  • 作者简介:2018-06-01

DEVELOPMENT AND APPLICATION OF SLG-1 CATALYST FOR LTAG TECHNOLOGY

  • Received:2018-04-17 Revised:2018-06-25 Online:2018-12-12 Published:2019-01-03

摘要: 针对加氢催化裂化轻循环油(LCO)的性质特点,开发了具有丰富中孔结构和强B酸活性的高可接近性Y型分子筛,具有更高的开环裂化反应能力。在此基础上,匹配重油预裂化能力和容炭能力强的基质,开发了加氢LCO回炼专用催化裂化催化剂SLG-1。工业应用结果表明:液化气收率降低了1.58百分点,汽油收率增加了4.00百分点,总液体收率增加2.17百分点。

关键词: LTAG, 催化剂, 加氢LCO, 催化裂化

Abstract: The high accessibility Y zeolite with an abundant mesoporous structure and strong B acid activity were designed according to the reaction features of hydrotreated light circulating oil (LCO). The resulting Y zeolite has an improved ring-opening ability. Combined with the matrix with heavy oil pre cracking capacity and strong carbon tolerance, a special catalytic cracking catalyst SLG-1 for processing hydrotreated LCO was developed. The industrial application results showed that the yield of LPG is reduced by 1.58 percentage points, the gasoline yield increases by 4 percentage points, and the total liquid yield improves by 2.17 percentage points.

Key words: LTAG, catalyst, hydrotreated LCO, FCC