石油炼制与化工 ›› 2026, Vol. 57 ›› Issue (4): 20-24.
• 加工工艺 • 上一篇 下一篇
徐宝岩
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 某石化公司针对2.8 Mt/a催化裂化装置存在的催化裂化柴油十六烷值低、产品分布不理想(催化裂化汽油收率低、液化气收率不足)等问题,通过新增轻循环油跨线至提升管底部喷嘴回炼的流程改善装置产品分布,使催化裂化柴油平均收率由轻循环油回炼前的20.3%下降为15.7%,获得了较好的经济效益。在装置试运期间,根据轻循环油化学组成与反应机理,对轻循环油回炼量及回炼效果进行分析,确定适宜的回炼量。
关键词: 催化裂化, 轻循环油, 回炼, 产物分布, 经济性
Abstract: In view of a series problems in a 2.8 Mt/a catalytic cracking(FCC) unit, including low cetane number of FCC diesel and unsatisfactory product distribution (low yield of FCC gasoline and insufficient yield of liquefied petroleum gas), a petrochemical company has implemented a new process that recycles light cycle oil (LCO) to the bottom nozzle of the riser via a cross-line modification, and the product distribution was optimized. The average diesel yield decreased from 20.3% to 15.7%, generating significant economic benefits.During the trial operation, the chemical composition and reaction mechanisms of LCO were analyzed to evaluate recycling parameters and effectiveness. The optimal recycling rate was determined to balance product distribution and economic efficiency.
Key words: catalytic cracking, light cycle oil, recycling, product distribution, economic analysis
徐宝岩. 催化裂化装置轻循环油回炼的工业实践及经济性分析[J]. 石油炼制与化工, 2026, 57(4): 20-24.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2026/V57/I4/20