石油炼制与化工 ›› 2026, Vol. 57 ›› Issue (6): 72-78.

• 加工工艺 • 上一篇    下一篇

烷基化装置酸再生单元干燥塔泄漏原因分析与对策研究

付晓锋,杨傲,杨新宇   

  1. 中国石油锦西石化分公司
  • 收稿日期:2025-11-28 修回日期:2026-03-18 出版日期:2026-06-12 发布日期:2026-05-22
  • 通讯作者: 付晓锋 E-mail:168666999@163.com
  • 作者简介:2026-06-15

ANALYSIS OF LEAKAGE CAUSES AND COUNTERMEASURES OF DRYING TOWER IN ACID REGENERATION UNIT OF ALKYLATION PLANT


  • Received:2025-11-28 Revised:2026-03-18 Online:2026-06-12 Published:2026-05-22

摘要: 某石化公司烷基化装置酸再生单元浓酸区干燥塔塔壁出现连续性腐蚀泄漏问题。为探究其失效机理,采用宏观观察、化学成分分析、金相检验、扫描电镜及能谱分析等方法,对失效样品进行了系统检测,并结合实际工艺运行参数,明确了操作温度过高与塔壁材质替换是导致该问题的根本原因。基于分析结果,从优化工艺操作与提升材料耐腐蚀性能两方面制定了针对性改进措施,以有效保障设备的长期安全稳定运行。

关键词: 烷基化装置, 酸再生, 干燥塔, 硫酸腐蚀, 晶间腐蚀, ZeCor-Z合金, 失效分析

Abstract: Continuous corrosion leakage occurred on the wall of the drying tower in the concentrated acid area of the acid regeneration unit of an alkylation plant in a petrochemical company. To investigate its failure mechanism, systematic tests were carried out on the failed samples by means of macroscopic observation, chemical composition analysis, metallographic examination, scanning electron microscopy and energy spectrum analysis. Combined with actual process operation parameters, it is determined that excessively high operating temperature and replacement of the tower wall material are the root causes of the failure.Based on the analysis results, targeted improvement measures were formulated from two aspects: optimizing process operation and improving the corrosion resistance of materials, so as to effectively ensure the long-term safe and stable operation of the equipment.

Key words: alkylation unit, acid regeneration plant, drying tower, sulfuric acid corrosion, intergranular corrosion, ZeCor-Z, failure analysis