石油炼制与化工 ›› 2012, Vol. 43 ›› Issue (1): 7-10.

• 加工工艺 • 上一篇    下一篇

GL-1再生烟气脱氯剂在连续重整装置上的工业应用

张相勇   

  1. 中国石化洛阳分公司,河南 洛阳 471012
  • 收稿日期:2011-07-06 修回日期:2011-08-30 出版日期:2012-01-12 发布日期:2011-12-28
  • 通讯作者: 张相勇 E-mail:zhxy_2001061713@163.com

INDUSTRIAL APPLICATION OF GL-1 DECHLORINATION ADSORBENT IN CCR UNIT

  • Received:2011-07-06 Revised:2011-08-30 Online:2012-01-12 Published:2011-12-28

摘要: 中国石化洛阳分公司0.7 Mt/a 连续重整装置(CCR)是由IFP CCR装置经过国产化技术改造而成,再生单元烟气脱氯由碱洗改为固体脱氯工艺,2009年5月以来再生单元烟气脱氯采用GL-1再生烟气脱氯剂平稳运用至今,结果表明,采用GL-1再生烟气脱氯剂对再生烧焦尾气进行脱氯,可使脱氯罐出口中HCl质量分数小于0.5 μg/g,脱氯剂使用寿命大于4个月,床层压降小于0.03 MPa,满足了连续重整再生烧焦气脱氯的需要,确保了CCR装置的平稳运转。

Abstract: GL-1 dechlorination adsorbent developed by Research Institute of Petroleum Processing has been applied in the 0.7 Mt/a CCR unit of Luoyang Petroleum Chemical Corporation since May 2009. The results of more than two years stably operation show that GL-1 dechlorination adsorbent possesses good dechlorination performance, for treating regeneration flue gas, the HCl mass fraction of treated gas is less than 0.5 μg/g. It also exhibits excellent anti-carbonation, anti-caking and anti-argillitization properties, thus the pressure drop of the dechlorination adsorbent bed is less than 0.03 MPa and its service life is over 4 months, which well meets the requirements for the dechlorination of regeneration flue gas in CCR unit.