FCC油浆中饱和烃的抽提方法研究

石油炼制与化工 ›› 2012, Vol. 43 ›› Issue (10): 29-34.

FCC油浆中饱和烃的抽提方法研究

史军军,杨雪,葛晓蓉,葸雷

中国石化石油化工科学研究院

收稿日期:2012-02-13 修回日期:2012-03-29 出版日期:2012-10-12 发布日期:2012-09-26
通讯作者: 史军军 E-mail:shijj.ripp@sinopec.com

STUDY ON THE EXTRACTION SEPARATION OF SATURATED HYDROCARBONS FROM FCC SLURRY

Received:2012-02-13 Revised:2012-03-29 Online:2012-10-12 Published:2012-09-26

摘要/Abstract

摘要： 以糠醛为抽提溶剂、正辛烷为第二溶剂，采用双溶剂抽提法对中国石化九江分公司和广州分公司FCC油浆进行抽提分离，得到饱和烃和芳烃，考察双溶剂抽提的操作条件及抽余油（富含饱和烃）的组成和裂化性能。结果表明，最佳的抽提条件为：温度50～70 ℃；第一阶段剂油比m（糠醛）:m（油浆）:m（正辛烷）＝2.0:1.0:1.5，第二阶段剂油比m（糠醛）:m（抽余相）＝0.67:1.00，第三阶段剂油比m（糠醛）: m（抽余相）＝1.20:1.00；抽提次数8次，第四次和第五次抽提之间进行一次抽余相溶剂提浓。在该条件下，九江分公司和广州分公司FCC油浆抽提分离得到的抽余油中饱和烃质量分数分别为77%和74%，饱和烃收率分别为95.23%和91.58%，分离效果良好，且得到的抽余油具有良好的裂化性能，是优质的催化裂化原料。

关键词: FCC油浆, 糠醛, 正辛烷, 抽提, 饱和烃

Abstract: Dual-solvent extraction of FCC slurry oil was performed with furfural as main solvent, n-octane as second solvent, the operation conditions, components of raffinate and its cracking performance were investigated. The optimal operation conditions were obtained as follows: extraction temperature in the range of 50～70 ℃; using 1st stage material mass ratios of m(furfural): m(slurry): m(n-octane)=2.0:1.0:1.5, 2nd stage of m(furfural): m(raffinate phase)=0.67:1.00, 3rd stage of m(furfural): m(raffinate phase)=1.20:1.00; the entire process involved 8 extraction steps (1st step as 1st stage, 2nd-4th steps as 2nd stage, 5th-8th steps as 3rd stage) with an additional solvent enrichment step added between the 4th and 5th step. Under such optimal extraction conditions, using FCC slurry oils from Sinopec Jiujiang Petrochemical Company and Sinopec Guangzhou Petrochemical Company as feed respectively, the mass fractions of saturated hydrocarbons in raffinates were 77% and 74%, respectively; the yields of saturated hydrocarbons reached 95.23% and 91.58%, respectively. The separation of saturated hydrocarbons from aromatics was successful, and the raffinate exhibited excellent cracking performance, it could be used as a high quality FCC feedstock.

Key words: FCC slurry, furfural, n-octane, extraction, saturated hydrocarbon

史军军杨雪葛晓蓉葸雷. FCC油浆中饱和烃的抽提方法研究[J]. 石油炼制与化工, 2012, 43(10): 29-34.

[1]	胡正海王宁. 环保橡胶填充油的研究与应用进展[J]. 石油炼制与化工, 2024, 55(1): 89-97.
[2]	韩亚梅余强李兰婷马宇春. 全自动固相萃取-气相色谱-质谱联用分析测定催化裂化柴油烃类组成[J]. 石油炼制与化工, 2023, 54(7): 130-136.
[3]	夏伟健. 溶剂脱沥青装置工艺条件研究及工业应用[J]. 石油炼制与化工, 2023, 54(12): 26-31.
[4]	周昌鑫高思亮田龙胜唐文成赵明. 直馏柴油芳烃抽提工艺的优化[J]. 石油炼制与化工, 2023, 54(1): 69-75.
[5]	洪晓煜淡明昌陈家岭兰勇臧高山冶克杰张会兵李光春. 优化催化重整反应进料提高产品辛烷值与降低苯含量[J]. 石油炼制与化工, 2022, 53(9): 22-26.
[6]	张方方. 大型对二甲苯装置的节能设计与优化[J]. 石油炼制与化工, 2022, 53(10): 70-75.
[7]	于恩强李明. 环烷基减四线馏分油加氢精制-糠醛萃取制备环保橡胶增塑剂的研究[J]. 石油炼制与化工, 2021, 52(3): 46-49.
[8]	赵明郁灼田龙胜唐文成庞伟伟. 裂解汽油回收苯乙烯工艺（STED）开发及应用[J]. 石油炼制与化工, 2021, 52(10): 163-169.
[9]	刘超华范渺. 以重整脱戊烷油与裂解加氢汽油为原料的芳烃抽提装置运转工况对比[J]. 石油炼制与化工, 2021, 52(1): 43-47.
[10]	孙显锋刘美芳李正付刚闵小建. 煤基加氢裂化尾油抽余油制备环保橡胶填充油的研究[J]. 石油炼制与化工, 2020, 51(12): 28-32.
[11]	谢朝钢邓中活罗一斌王辉国. DCC技术平台产业链的开发及其工业实践[J]. , 2020, 51(11): 1-6.
[12]	孙显锋王丹君辛金妮乔婧闵小建. 煤基加氢裂化尾油溶剂抽提脱除多环芳烃的研究[J]. 石油炼制与化工, 2020, 51(11): 17-21.
[13]	田义斌张海洪韩龙年张翠侦. 环烷基蜡油生产橡胶填充油的工艺对比[J]. 石油炼制与化工, 2019, 50(8): 17-21.
[14]	张卉蔡烈奎. 糠醛精制抽余油生产环烷基橡胶增塑剂的工艺优化研究[J]. 石油炼制与化工, 2019, 50(5): 57-60.
[15]	于恩强宋君辉. 加氢改质装置掺炼轻质糠醛抽出油制备粗白油的研究[J]. 石油炼制与化工, 2019, 50(3): 72-76.