石油炼制与化工 ›› 2012, Vol. 43 ›› Issue (12): 50-54.

• 加工工艺 • 上一篇    下一篇

满足国Ⅴ汽车排放标准汽油的生产技术路线

宋以常   

  1. 中国石化北京燕山分公司
  • 收稿日期:2012-03-15 修回日期:2012-04-19 出版日期:2012-12-12 发布日期:2012-11-30
  • 通讯作者: 宋以常 E-mail:songyc1967@163.com

PRODUCTION ROUTE OF GASOLINE MEETING NATIONAL EMISSION STANDARD V FOR MOTOR VEHICLES

  • Received:2012-03-15 Revised:2012-04-19 Online:2012-12-12 Published:2012-11-30

摘要: 介绍中国石化北京燕山分公司已实现工业化的催化裂化汽油加氢精制和吸附脱硫工艺的技术特点和工业应用情况,以及北京地方标准汽油的生产现状和满足国V汽车排放标准汽油的生产技术路线,并提出炼油系统下一步扩能改造的建议。总的来看,该公司汽油生产装置结构合理,超低硫汽油组分资源充足,采用的S Zorb工艺与传统的汽油加氢脱硫工艺相比,在达到相同的汽油脱硫率时汽油辛烷值损失小,氢耗和能耗低,可满足国V汽车排放标准汽油的生产要求。

Abstract: In this paper, the production rout of super low sulfur gasoline meeting National Emission Standard V at Sinopec Beijing Yanshan Company is introduced, as well as the technical characteristics and industrial application results of FCC gasoline hydrotreating and adsorption desulfurization processes, current status of producing gasoline meeting the requirements of Beijing local standard are reviewed, finally, some suggestions for extending super low sulfur gasoline production are proposed. On the whole, the configuration of gasoline production units in Yanshan Company is fine having enough super low sulfur blending components for gasoline pool; compared with conventional gasoline hydrotreating process, to reach the same sulfur removal rate of gasoline, adopting S Zorb process shows less octane number loss, lower hydrogen and energy consumption, it can well meet the demand of producing gasoline meeting National Emission Standard V for motor vehicles.