石油炼制与化工 ›› 2012, Vol. 43 ›› Issue (2): 38-40.
• 加工工艺 • 上一篇 下一篇
柳荣
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 为了满足柴油质量升级的需求,根据中国石化天津分公司加氢原料构成、原料油性质及产品质量要求,结合现阶段加氢装置处理能力不足、原料油构成复杂及柴油产品质量现状,在对加氢原料油进料整体优化考虑的基础上提出了三种技术方案,对这三种方案进行对比后,根据整体投资建设计划,最终选择新建一套1.8 Mt/a加氢装置,以加工劣质原料为主的技术方案,满足生产符合国IV和国V排放标准清洁柴油的要求。
关键词: 柴油 , 加氢精制 , 劣质原料 , 质量升级 , 技术方案
Abstract: In order to meet the needs of upgrading diesel fuel quality, based on analyzing the makeup and properties of hydrotreating feedstocks in Tianjin Petrochemical Corporation, considering the present status of hydrotreating units and integrating optimization of hydrotreating feedstocks, three technical options to upgrade the quality of diesel fuel were proposed. By comparing these options from the technical and economic aspects and based on the total investment plan of construction, technical option with establishing a 1.8 Mt/a hydrotreating unit for treating poor quality feedstocks mainly was chosen, which could be used to produce clean diesel fuel meeting the requirements of National Emission Standard IV and V.
Key words: diesel, hydrotreating, poor quality feedstocks, quality upgrade, technology program
柳荣. 柴油产品质量升级技术方案的探讨[J]. 石油炼制与化工, 2012, 43(2): 38-40.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2012/V43/I2/38