石油炼制与化工 ›› 2012, Vol. 43 ›› Issue (2): 51-53.
• 加工工艺 • 上一篇 下一篇
周广林,周红军,吴全贵
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 开发了用于脱除甲乙酮装置脱氢尾气中的微量甲乙酮和仲丁醇的QMS-01吸附剂,并在工业装置上进行了工业应用。QMS-01吸附剂在脱氢尾气空速90~100 h-1、压力2.4~3.0 MPa、温度5~10 ℃的条件下,可使尾气中甲乙酮质量分数降至小于1 μg/g、仲丁醇质量分数降至小于1 μg/g。工业装置的应用结果表明,QMS-01吸附剂性能稳定,可操作范围宽,可使用3~5年,能满足工业装置的工艺要求。
关键词: 吸附剂 , 氢气 , 甲乙酮 , 仲丁醇 , 再生
Abstract: QMS-01 adsorbent for removing methyl ethyl ketone and sec-butyl alcohol from hydrogen were developed and used for the purification of hydrogen in tail gas from methyl ethyl ketone unit. The commercial application results showed that using QMS-01 adsorbent, under appropriate conditions of tail gas space velocity in the range of 90-100 h-1, reaction pressure in the range of 2.4-3.0 MPa and reaction temperature in the range of 5-10 ℃, the mass fraction of methyl ethyl ketone and sec-butyl alcohol in the tail gas could be both less than 1 μg/g. The purified hydrogen could well meet the requirements of hydrogen for hydrogenation processes, and the adsorbent could be regenerated having a service life of about 3-5 years.
Key words: adsorbent, hydrogen, methtyl ethyl ketone, sec-butyl alcohol, regeneration
周广林 周红军 吴全贵. 甲乙酮装置尾气中氢气净化吸附剂的工业应用[J]. 石油炼制与化工, 2012, 43(2): 51-53.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2012/V43/I2/51