石油炼制与化工 ›› 2012, Vol. 43 ›› Issue (8): 7-12.
• 加工工艺 • 上一篇 下一篇
刘凯祥,李浩,孙丽丽,刘家明
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 以柴油加氢精制装置多种工况的基本数据为计算基础,考察上流式反应器内液相体积分率的变化规律以及相关操作参数对液相体积分率的影响。结果表明,在上流式反应器内从催化剂床层入口到出口是液相体积分率逐渐增加的过程,操作压力、操作温度和补充氢的组成对反应器内液相体积分率的影响很小,但循环比和注氢方式对其影响较大,液相体积分率随循环比的增加而增加,多点注氢方式可以提高催化剂床层的液相体积分率。反应器出口液相体积分率可以通过数学关联公式预测,以实现连续液相加氢生产的自动控制。
Abstract: Based on the basic data of a gas oil hydrotreating unit under various process conditions, the changing rule of liquid phase volume fraction in up-flow reactor and the effect of operation parameters on the liquid phase volume fraction are investigated. It is found that in an up-flow reactor, the liquid phase volume fraction increases along the inlet to the outlet of the catalyst bed gradually; the composition of make-up hydrogen, operation pressure and temperature only affect the liquid phase volume fraction slightly, yet recycle oil ratio and the feeding mode of make-up hydrogen have significant influence: the liquid phase volume fraction increases with the increase of recycle oil ratio and adopting multi-point feeding of make-up hydrogen can improve the liquid phase volume fraction effectively. The liquid phase volume fraction at the reactor outlet can be predicted by calculation using mathematical correlation equations, thus automated process control is made possible through DCS system to maintain stable operation of the unit.
刘凯祥 李浩 孙丽丽 刘家明. 上流式加氢反应器内连续液相的控制方法[J]. 石油炼制与化工, 2012, 43(8): 7-12.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2012/V43/I8/7