石油炼制与化工 ›› 2013, Vol. 44 ›› Issue (1): 80-82.
• 加工工艺 • 上一篇 下一篇
王新建,张雷
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 介绍 RSDS-II技术在中国石化青岛石油化工股份有限公司的工业应用情况。工业应用结果表明:采用RSDS-II技术可以生产硫质量分数小于150 ?g/g的满足国III排放标准要求的汽油和硫质量分数小于50 μg/g的满足国IV排放标准要求的汽油,且辛烷值损失小。长期生产运行数据表明,在催化裂化汽油硫含量变化较大 (217~1 400 μg/g) 的情况下,产品质量基本保持稳定,且装置可以长周期稳定运转,完全可以满足炼油厂汽油质量升级的需要。
Abstract: The commercial application of RSDS-II technology in Sinopec Qingdao Petrochemical Company is introduced. Results show that the sulfur content of the treated catalytic cracking gasoline can be dropped to less than 150 μg/g, which meets the requirement of National Emission Standard III, and it can even be less than 50 μg/g, which meets the requirement of National Emission Standard IV. In addition, the RON loss of the product is only a little. It is shown from the data of long term running, the product quality is stable and the unit is running steadily, although the sulfur content of feed varied significantly (217—1 400 μg/g), in conclusion, RSDS-II technology can well meet the need of upgrading gasoline quality.
王新建 张雷. 应用RSDS-II技术生产满足国Ⅲ和国Ⅳ排放标准汽油[J]. 石油炼制与化工, 2013, 44(1): 80-82.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2013/V44/I1/80