石油炼制与化工 ›› 2013, Vol. 44 ›› Issue (12): 20-22.

• 加工工艺 • 上一篇    下一篇

柴油液相循环加氢技术的工业应用

郝振岐,梁文萍,肖俊泉,张永奎   

  1. 中国石化石家庄炼油化工股份有限公司
  • 收稿日期:2013-05-30 修回日期:2013-08-19 出版日期:2013-12-12 发布日期:2013-11-20
  • 通讯作者: 张永奎 E-mail:zhangyongkui.sjlh@sinopec.com

COMMERCIAL APPLICATION OF DIESEL LIQUID PHASE RECYCLING HYDROGENATION TECHNOLOGY

  • Received:2013-05-30 Revised:2013-08-19 Online:2013-12-12 Published:2013-11-20

摘要: 具有中国石化自主知识产权的柴油液相循环加氢技术在中国石化石家庄炼油化工股份有限公司实现首次工业化成功应用。结果表明:采用该技术生产的柴油满足车用柴油国Ⅳ排放标准要求;实际标定时,原料采用部分直供,装置能耗为298.87 MJ/t,如果装置按照设计全部为热进料,该装置能耗为242.02 MJ/t,远低于传统滴流床工艺418 MJ/t左右的平均能耗。

Abstract: Diesel liquid phase recycling hydrogenation technology with SINOPEC independent intellectual property rights achieves successfully industrial application for the first time in Shijiazhuang Refining & Chemical Company. Industrial application results show that diesel meeting national Ⅳ vehicle diesel emission standards can be produced by this technology; energy consumption is 298.87 MJ/t with feedstock being partially direct hot feed in the performance test, while energy consumption will be 242.02 MJ/t if all feedstock are direct hot feed according to the design, far lower than about 418 MJ/t with the traditional trickle bed process.