石油炼制与化工 ›› 2014, Vol. 45 ›› Issue (1): 47-50.
• 基础研究 • 上一篇 下一篇
李志超1,王璐2,杨朝合3,李春义3
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
基金资助:
国家973计划资助项目
Received:
Revised:
Online:
Published:
摘要： 在循环流化床冷模实验装置上对安装2种环管喷嘴提升管的气固流动结构进行研究，根据气体和颗粒的分布情况，计算了使用2种喷嘴情况下的提升管相对气固接触效率(RCE)和截面平均气固接触效率(CCE)，并进行了比较。结果表明:使用喷嘴B时，提升管的颗粒浓度、气固接触效率均优于使用喷嘴A时，但随着提升管高度的增加，使用2种喷嘴时的情况趋于一致。
Abstract: The gas-solid flow structure in FCC riser was studied in detail in a CFB cold model unit using ring-feeders with different form. Based on the gas and solids distributions, relative gas-solid contact efficiency (RCE) and cross-sectional gas-solid contact efficiency (CCE) were calculated and compared. Experimental results indicate that solid concentration and gas-solid contact efficiency could be different in riser with different form of feeder. However, the effect of the feeder form on the gas-solid flow structure is diminished along with the increase of riser height.
李志超 王璐 杨朝合 李春义. FCC环管进料喷嘴对提升管中气固流动结构的影响[J]. 石油炼制与化工, 2014, 45(1): 47-50.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2014/V45/I1/47
京公网安备 11010802027553号
