石油炼制与化工 ›› 2014, Vol. 45 ›› Issue (6): 79-81.

• 加工工艺 • 上一篇    下一篇

NCMA脱碳溶剂在干气提浓装置的应用

刘百强1,朱道平2   

  1. 1. 中国石化武汉分公司
      2. 南化集团研究院江苏省气体净化新型溶剂工程技术研究中心
  • 收稿日期:2014-02-12 修回日期:2014-02-28 出版日期:2014-06-12 发布日期:2014-05-28
  • 通讯作者: 朱道平 E-mail:zhudp.nhgs@sinopec.com
  • 基金资助:

    中国石化集团公司项目

INDUSTRIAL APPLICATION OF NCMA SOLVENT FOR CARBON DIOXIDE REMOVAL IN DRY GAS ENRICHMENT UNIT

  • Received:2014-02-12 Revised:2014-02-28 Online:2014-06-12 Published:2014-05-28

摘要: 南化集团研究院开发的NCMA脱碳溶剂在中国石化武汉分公司干气提浓装置的工业应用结果表明:与原设计的MDEA脱硫溶剂相比,采用NCMA脱碳溶剂,胺液吸收CO2的能力大幅提高,在处理量相当的情况下,干气提浓装置提浓干气吸收塔的胺液循环量由 33 t/h下降到 14 t/h;胺洗后提浓干气中CO2体积分数低于50μL/L,溶剂的H2S负荷以及脱除硫醇的能力均有所提高。

Abstract: The industrial application of NCMA solvent for CO2 removal in dry gas enrichment unit in Wuhan Co. Sinopec was reviewed. The results show that the NCMA solvent can improve CO2 absorption performance compared with MDEA. At the same throughput of the unit, the recycling amine solution rate to the dry gas absorption tower is dropped from 33t/h of MDEA to 14t/h of NCMA solvent and the concentration of CO2 in the treated gas also decreased from 400μL/L to less than 50μL/L. Meanwhile, the H2S loading of NCMA solvent and ability to remove mercaptan are higher than MDEA. Finally, the alkali consumption, electricity consumption and emissions of alkali waste of the process are all reduced by using NCMA solvent in stead of MDEA.