石油炼制与化工 ›› 2014, Vol. 45 ›› Issue (9): 57-61.
• 催化剂 • 上一篇 下一篇
田文君1,刘子杰2,张磊1,郑晓曦1
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 针对南方某大型炼油厂3.5 Mt/a催化裂化装置,研究开发了一种新型高效重油转化催化剂A。实验室评价结果表明,使用该催化剂后油浆收率和焦炭收率降低,总液体收率略有提高,丙烯收率大幅增加。催化剂A在该炼油厂催化裂化装置工业应用的结果表明,与原催化剂相比,使用重油转换催化剂A后,在原料性质基本相当的情况下,平衡剂金属含量明显降低,丙烯收率增大1.07百分点,油浆产率降低2.91百分点,汽油研究法辛烷值增大0.59个单位,CO焚烧炉出口烟气NOx浓度略有降低。
Abstract: A new high efficient heavy oil conversion catalyst A was developed and commercialized for a RFCC unit with a capacity of 3.5 Mt/a. The lab results showed that the slurry and coke yield reduced; the total liquid yield increased slightly and the propylene yield increased significantly. The commercial application results show that compared with the results of the original catalyst,using the feed with same properties, the metal content on the equilibrium catalyst decreases, propylene yield increases by 1.07 %, slurry yield lowers by 2.91% , RON of FCC gasoline increases by 0.59, the NOx concentration at CO incineration flue gas furnace outlet decreases slightly.
田文君 刘子杰 张磊 郑晓曦. 高效重油转化催化裂化催化剂的工业应用[J]. 石油炼制与化工, 2014, 45(9): 57-61.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2014/V45/I9/57