石油炼制与化工 ›› 2015, Vol. 46 ›› Issue (6): 17-20.
• 加工工艺 • 上一篇 下一篇
夏强斌
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 对石脑油型加氢裂化反应过程影响因素进行了研究,结果表明:转化深度的提高有利于增产重石脑油,但选择性和芳烃潜含量有所下降,氢分压的变化对重石脑油收率、选择性和芳烃潜含量影响较小,循环重石脑油以上馏分,可获得更高的重石脑油选择性且重石脑油收率可达68%以上。根据中国石化石油化工科学研究院石脑油型加氢裂化技术试验结果,设计了1 500 kt/a加氢裂化装置,采用尾油馏分循环生产石脑油和柴油馏分方案,可为炼油厂每年提供700 kt以上的重整装置原料,满足重整装置生产的需求。
关键词: 加氢裂化, 石脑油 , 重整料
Abstract: Hydrocracking is an important technology for maximizing reforming feedstock naphtha production. The influence factors of the reaction process were studied. The results show that the heavy naphtha yield is increased, but the heavy naphtha selectivity and potential aromatics content are reduced with increasing of conversion degree. While the changes of hydrogen partial pressure within the test range have little impact on those features. The heavy naphtha selectivity and potential aromatics content are improved by cycling the unconverted oil. The yield of heavy naphtha reaches up to 68% by this operation mode. Based on the test results, a 1 500 kt/a hydrocracking unit was built in Taizhou petrochemical Co. where the recycling mode for increasing naphtha and diesel suggested by RIPP was applied. The technology could meet the demands of reforming feedstock and clean diesel.
Key words: hydrocracking, naphtha, reforming feedstock
夏强斌. 石脑油型加氢裂化技术及装置设计[J]. 石油炼制与化工, 2015, 46(6): 17-20.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.sylzyhg.com/CN/
http://www.sylzyhg.com/CN/Y2015/V46/I6/17