石油炼制与化工 ›› 2016, Vol. 47 ›› Issue (11): 103-108.

• 油品与添加剂 • 上一篇    下一篇

电子压延铜箔轧制油的研制及其润滑性能的研究

徐阳,孙建林,严旭东,熊桑   

  1. 北京科技大学材料科学与工程学院
  • 收稿日期:2016-04-13 修回日期:2016-04-25 出版日期:2016-11-12 发布日期:2016-10-27
  • 通讯作者: 孙建林 E-mail:sjl@ustb.edu.cn
  • 基金资助:
    国家自然科学基金项目

STUDY ON PREPARATION AND PERFORMANCE OF ROLLING OIL FOR ELECTRONIC ROLLED COPPER FOIL

    

  1.  
  • Received:2016-04-13 Revised:2016-04-25 Online:2016-11-12 Published:2016-10-27
  • Contact: Sun Jianlin E-mail:sjl@ustb.edu.cn
  • Supported by:
     

摘要: 以多种直链醇、酯和新型磷酸胺以及唑类缓蚀剂为主要添加剂研制新一代电子级铜箔轧制油CFCO。在实验室对该轧制油的摩擦学性能及抗腐蚀能力进行研究,并在工业轧机上进行冷轧润滑试验考察油品的润滑性能。结果表明:CFCO铜箔轧制油与国外油品性能相当,具有优异的摩擦学性能,显著降低表面粗糙度,增大表面形貌的均匀性;同时具有良好的缓蚀防锈性能,有利于解决轧后板面氧化变色问题,提高产品表面质量。

关键词: 压延铜箔, 轧制油, 摩擦磨损, 缓蚀

Abstract: The performance of copper foil rolling oil has a profound impact on the product quality. A variety of straight chain alcohols, esters and new phosphoric acid amines (CAP) and azoles corrosion inhibitors is applied as the main additives to produce a new generation of copper foil rolling oil CFCO. The tribological performance of CFCO and its corrosion inhibition properties were studied. The lubrication performance was comprehensively investigated with a cold rolling test in a commercial scale. The results show that the CFCO copper foil rolling oil has excellent tribological properties, significantly reducing surface roughness, increasing the uniformity of surface morphology; at the same time, it has a good corrosion inhibition performance which can be used to resolve the problems in rolled surface oxidation and discoloration and increase surface quality of products.

Key words: rolled copper foil, rolling oil, friction and wear, corrosion inhibition

中图分类号: