›› 2016, Vol. 47 ›› Issue (4): 86-90.

• 油品与添加剂 • 上一篇    下一篇

红外光谱法在研究硫磷型合成齿轮油性能衰变中的应用

杨洪滨   

  1. 中国铁道科学研究院金属及化学研究所
  • 收稿日期:2015-10-09 修回日期:2015-11-30 出版日期:2016-04-12 发布日期:2016-04-19
  • 通讯作者: 杨洪滨 E-mail:yanghb08@126.com
  • 基金资助:
    中国铁道科学研究院金属及化学研究所基金项目

STUDY OF PERFORMANCE DEGRADATION OF SYNTHETIC SULFUR-PHOSPHORUS TYPE GEAR OIL BY FT-IR

  • Received:2015-10-09 Revised:2015-11-30 Online:2016-04-12 Published:2016-04-19

摘要: 利用傅里叶变换红外光谱仪分析了氧化前后的合成齿轮油,确立了试验油氧化吸收峰位在波数1 724~1 684 cm-1范围;通过分析不同硫剂含量的基础油,确立了波数在1 130~1 080 cm-1和920~870 cm-1处为硫化烯烃C—S键的特征吸收峰位置;通过分析不同含量的磷系添加剂,确立了波数在1 100~925 cm-1和700~640 cm-1处为P—O—C键和P=S键的特征吸收峰位置。利用红外光谱法对某机车齿轮油(GL-5 75w-90)在使用过程中的性能衰变研究,结果表明:基础油的氧化在100 000 km前递增较快,100 000 km后变化趋势平稳;极压抗磨剂不断降解,其中磷剂的降解更快,起主要作用的官能团是P=S基团。

关键词: 红外光谱, 氧化, 添加剂降解

Abstract: This paper used FT-IR to analysisthe before and after oxidation of oil and the infrared absorption band of the gear oil was located in 1 724—1 684 cm-1. By analyzing the sulfur and phosphorus type additives,the wave number ranges of C—S groups were located in 1 130—1 100 cm-1 and 920—870 cm-1,P—O—C groups in 1 130—1 090 cm-1 and P=S groups in 920—870 cm-1. By using the IR spectrometer,the decay law of gear oil(GL-5 75w-90)which used in locomotive wasstudied。The results show that the changes of oxidation were rapidly increased within 100 000 km,and changed smoothly after 100 000 km. The degradation of extreme pressure-antiwear additives was mainly the degradation of phosphorus type additives,and the P=S groupsplayed a major role.

Key words: FT-IR, oxidation, degradation of additives