石油炼制与化工 ›› 2018, Vol. 49 ›› Issue (3): 80-84.

• 加工工艺 • 上一篇    下一篇

催化汽油加氢装置GARDES技术的工业应用

杨黎峰,刘昕,刘特林,刘建龙   

  1. 中国石油四川石化有限责任公司
  • 收稿日期:2017-08-14 修回日期:2017-09-25 出版日期:2018-03-12 发布日期:2018-03-20
  • 通讯作者: 杨黎峰 E-mail:46469392@qq.com
  • 基金资助:
     

INDUSTRIAL APPLICATION OF GARDES TECHNOLOGY IN CATALYTIC CRACKING GASOLINE HYDROGENATION

  1.  
  • Received:2017-08-14 Revised:2017-09-25 Online:2018-03-12 Published:2018-03-20
  • Contact: Yang Lifeng E-mail:46469392@qq.com
  • Supported by:
     

摘要: 中国石油四川石化有限责任公司1.1 Mt/a催化裂化汽油加氢装置采用中国石油石油化工研究院与中国石油大学(北京)合作研发的GARDES汽油加氢技术,以催化裂化汽油为原料,生产硫含量满足GB 17930—2016的车用汽油(V)(简称国V汽油)调合组分。标定结果表明,以硫质量分数69.6 μg/g,烯烃体积分数30.3%,芳烃体积分数18.4%的催化裂化汽油为原料,经GARDES技术处理后,混合汽油产品的硫质量分数为7.1 μg/g,辛烷值(RON)为91.7,比全馏分汽油原料的辛烷值(RON)损失0.5个单位,混合汽油收率99.41 %,优于控制指标,装置综合能耗略高于控制指标。

关键词: 催化裂化汽油, 加氢, GARDES

Abstract: GARDES technology developed by PetroChina Petroleum and Petrochemical Research Institute and China University of Petroleum (Beijing) was adopted in the 1.1 Mt/a catalytic cracking gasoline hydrogenation unit of PetroChina Sichuan Petrochemical co. Ltd,using catalytic cracking gasoline as the raw material to produce motor gasoline blending component in compliant with GB 17930—2016. The calibration results indicated that the mixed gasoline products with the mass fraction of sulfur of 7.1 μg/g can be obtained from the raw material of FCC gasoline with the mass fraction of sulfur of 69.6 μg/g,volume fraction of olefin of 30.3%,volume fraction of aromatics of 18.4%,and the octane number(RON) of 91.7. The loss of octane number(RON)is 0.5 unit. The yield of mixed gasoline is 99.41%, which is better than the control index, and the integrated energy consumption is slightly higher than the control index.

Key words: catalytic cracking gasoline, hydrogenation, GARDES

中图分类号: