›› 2018, Vol. 49 ›› Issue (7): 54-57.

• 催化剂 • 上一篇    下一篇

PHF柴油加氢催化剂加工高硫直馏柴油的工业应用

冯连坤   

  1. 中国石油云南石化有限公司
  • 收稿日期:2017-12-19 修回日期:2018-03-28 出版日期:2018-07-12 发布日期:2018-07-26
  • 通讯作者: 冯连坤 E-mail:fengliankun@petrochina.com.cn

COMMERCIAL APPLICATION OF PHF CATALYST IN HIGH SULFUR STRAIGHT-RUN DIESEL HYDROTREATING

feng liankun   

  • Received:2017-12-19 Revised:2018-03-28 Online:2018-07-12 Published:2018-07-26
  • Contact: feng liankun E-mail:fengliankun@petrochina.com.cn

摘要: 介绍了PHF柴油加氢催化剂在中国石油云南石化有限公司2.8 Mt/a柴油加氢装置的应用情况。结果表明,在反应器入口温度324 ℃,体积空速0.79 h-1,氢油体积比625的情况下,可以将直馏柴油的硫质量分数从12 700 降至4.0 μg/g,生产出硫含量满足国Ⅴ排放标准要求的精制柴油。对装置运行状况进行的分析,可为供同类装置生产满足国Ⅴ排放标准柴油参考。

关键词: 催化剂, 直馏柴油, 高硫原料, 加氢, 国Ⅴ柴油标准

Abstract: The commercial operation of 2.8 Mt/a diesel hydrotreating unit in Yunnan refinery using PHF catalyst was introduced. The results showed that at reactor inlet temperature of 324 ℃, space velocity 0.79 h-1, volume ratio of hydrogen to oil 625:1, the sulfur content of refined diesel is 4 μg/g from 12 700 μg/g in feed. The product meets the requirements of the state Ⅴ diesel specification.

Key words: catalyst, straight-run diesel, high sulfur feed, hydrotreating, national V diesel specification