石油炼制与化工 ›› 2020, Vol. 51 ›› Issue (2): 71-75.

• 油品与添加剂 • 上一篇    下一篇

聚苯胺锂基润滑脂载流润滑下的摩擦学性能

冯欣,夏延秋   

  1. 华北电力大学能源动力与机械工程学院
  • 收稿日期:2019-08-05 修回日期:2019-09-05 出版日期:2020-02-12 发布日期:2020-02-27
  • 通讯作者: 夏延秋 E-mail:xiayq@ncepu.edu.cn
  • 基金资助:
    北京市自然科学基金资助项目

TRIBOLOGICAL PROPERTIES OF POLYANILINE LITHIUM GREASE UNDER CURRENT-CARRYING LUBRICATION

#br#   

  1.  
  • Received:2019-08-05 Revised:2019-09-05 Online:2020-02-12 Published:2020-02-27
  • Contact: Xia Yanqiu E-mail:xiayq@ncepu.edu.cn
  • Supported by:
     

摘要: 制备了导电聚苯胺锂基润滑脂(简称PANI脂)和铜基银镀层材料(简称银层材料)。采用摩擦磨损试验机考察在无载流、载流及边界润滑条件下,铜基体材料(简称铜基材料)和银层材料的摩擦磨损性能。采用X射线衍射(XRD)、扫描电子显微镜(SEM)和电子能谱(EDS)对银层材料晶相及其表面磨斑形貌进行表征。结果表明,载流条件下,PANI脂润滑试验时的银层材料不仅具有良好的减摩抗磨性能,而且导电能力更强,其优异的减摩和抗磨性能归功于摩擦表面的保护膜和电流热效应引起的表面软化双重作用。

关键词: 聚苯胺锂基润滑脂, 电镀银层, 接触电阻, 载流润滑

Abstract: Conductive polyaniline lithium grease (PANI grease) and silver coating copper material (silver coating material) were prepared. The friction and wear properties of copper based material and silver coating material were investigated by friction and wear testing machine under the conditions of no current-carrying,current-carrying and boundary lubrication. The silver coating material and surface grinding appearence were characterized by XRD, SEM and EDS. The results showed that the silver coating material not only had good antifriction and antiwear properties, but also had stronger conductivity in PANI grease lubrication test under the condition of current-carrying. The excellent antifriction and antiwear properties of the silver coating material were attributed to the dual functions of the protective film and surface softening caused by the current heat effect.

Key words: polyaniline lithium-based grease, silver plating layer, electrical contact resistance, current-carrying Lubrication

中图分类号: